Jump to content
SAU Community

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

Fujitsubo Legalis R sounds good, bit quite but thats good.

Has an annoying popping on idle though.

On another note, this has been covered in my previous post

http://www.skylinesaustralia.com/forums/in...opic=90146&st=0

and

http://www.skylinesaustralia.com/forums/in...dpost&p=1707725

Fujitsubo Legalis R sounds good, bit quite but thats good.

Has an annoying popping on idle though.

On another note, this has been covered in my previous post

http://www.skylinesaustralia.com/forums/in...opic=90146&st=0

and

http://www.skylinesaustralia.com/forums/in...dpost&p=1707725

Alex,

i've seen the link before . The clips doesnt work though. When i pressed the play button nothing happens.so... Will love to hear the different notes.

Im a bitsnpieces 'ebay' sort of bloke:

* Just Jap stainless steel 3inch dump pipe from turbo to cat

* BosImporting 3inch mild steel cat converter from Batmbl here on SAU

* no-name 3inch mild steel cat-back R33 system with cut & weld to make it around 4inches longer, no resonator, 1 muffler rather big at back of car next to the weld, nice and quiet, but yet freeflowing (would be very free flowing, but loud I fear, with a canon muffler of some type)

who needs brand names???? :ermm:

They all work for me, but they are all RB25's.

If i could have my pick of that bunch again, in a manual car and without the worry of cops sticking something up my ass, I would buy the "hiper2" exhaust or "nismo2" or HKS super dragger. Probably hiper2

Yeah I have the same exhaust as Alex... I have the resonater removed, lil more note. But still quiet as. I think Im going to change the rear cannon... start making some more noise :rofl: Just a question guys... Do the magicat dump pipes make any more noise? Or can it not be heard?

They all work for me, but they are all RB25's.

If i could have my pick of that bunch again, in a manual car and without the worry of cops sticking something up my ass, I would buy the "hiper2" exhaust or "nismo2" or HKS super dragger. Probably hiper2

Which brand is the hiper 2?

Also have you guys heard of a brand called BOYZ? Full titanium echaust for only 1k!!

Edited by stasis

where did you pick up the fujitsubo system? whod you get it through? ive heard of the name, but not seen it anywhere.

Whats a decent price for a dump pipe, high flow cat, split pipe at the rear feeding to a 2inch cannon either side? (rear bar im getting has twin outlets) and the piping plus labour? 3 inch til the diff, then split to 2inch.

any recommended shops in brissie for this?

where did you pick up the fujitsubo system? whod you get it through? ive heard of the name, but not seen it anywhere.

Whats a decent price for a dump pipe, high flow cat, split pipe at the rear feeding to a 2inch cannon either side? (rear bar im getting has twin outlets) and the piping plus labour? 3 inch til the diff, then split to 2inch.

any recommended shops in brissie for this?

Well i think im an expert by now after getting the Hyper rev mag.

What type is your stages? The Rb25s? If so go for 3" all the way including the dump pipe with seperate wastegate. As for prices it varies like heavan and earth. Dpends wheter you are brand consious or not.

f*kitsubo is like a mercs in its class very good and high quality. Although theres few other brand that you can get such as Tanabe, Trust (good price personally), Kakimoto, Dolphin (Rolls royce class) HKS(good price), Fujitsubo. Just depends are you brand concious or not like Tangles sais. No offence Tangles

i reckon tangles is onto a good thing, if it works.

not all that brand conscious. as long as it flows well and doesnt sound like a massey ferguson, i dont mind pealing made in taiwan stickers off it.

ok maybe thats an overstatement, but the point is it doesnt have to be apexi, trust, blitz or whatever. as long as it aint autotechnica. good ole autobarn.

ps explain - dump pipe with seperate wastegate? eh?

i reckon tangles is onto a good thing, if it works.

not all that brand conscious. as long as it flows well and doesnt sound like a massey ferguson, i dont mind pealing made in taiwan stickers off it.

ok maybe thats an overstatement, but the point is it doesnt have to be apexi, trust, blitz or whatever. as long as it aint autotechnica. good ole autobarn.

ps explain - dump pipe with seperate wastegate? eh?

if thats the case get everything from just jap excepet for the cat back if you dont want to sound like a massey :woot: . Get the muffle a magnaflow or something recomended by Alex or bosimports.

Personally i think bos imports stuff is better than just jap though

ok alex, next time you scout this page, recommend something! i need everything from the turbo back to the diff, where it splits in two. should i keep it 3in even after the split?

haha my XF falcon has a magnaflow... brilliant.

bosimports has a site?

ok alex, next time you scout this page, recommend something! i need everything from the turbo back to the diff, where it splits in two. should i keep it 3in even after the split?

haha my XF falcon has a magnaflow... brilliant.

bosimports has a site?

www.bosimports.com.au i think

Got a HKS dump pipe $280, RS-R stainless front pipe $120..both bought in Japan, hence the price, magic cat, and a Fujitsubo Legalis R catback, $1050 from BT-Revolution in melbourne. Not much louder than standard.

Got a HKS dump pipe $280, RS-R stainless front pipe $120..both bought in Japan, hence the price, magic cat, and a Fujitsubo Legalis R catback, $1050 from BT-Revolution in melbourne. Not much louder than standard.

thats good

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...