Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I used to race karts but don't get enough time now. I stil get out and have a fang at Todd Rd with the boys. Best fun you can have with your pants on and not that expensive once you've gotten over the shock of buying a kart.

I also did a bit of Superkarting a few years ago. That was cool as you got to run on full size tracks.

  • 4 weeks later...

Update:

I ended up getting myself motivated, got a kart, a 2004 arrow ax8 with J, and had my first meet on the weekend just gone.

Impressions, good fun and a world away from hire karts, racing against people with some skill level is also a lot more fun.

Didn't have the best weekend though, 2 dnf's which were purely my fault, but I didnt finish last in the 3 races I did finish. There were 3 P platers there, one bloke was no where near the pace, the other went quite well. I was generally on the pace of some of the regulars and actually finished ahead of a few on occasion, but not up with the front runners.

I havent had much practice so i was fairly happy. I think spending a little extra and buying a semi decent kart made it worthwhile, another p plater who bought some older gear wasn't even in the ball park, almost getting lapped, while i was still in with the main pack.

Good fun, would recommend it to everyone, though the cost is starting to get to me a bit now. Time for a few weeks away from the kart so I dont spend any more money.

My old man supplies Kart parts and Chassis from sodikart in France.We can get anything from your begginers

j kart to the 250 6 speed gearbox kart which absouletly hammers,Kart parts sprockets,exhausts, rebuilds etc.The top end we can supply computers for monitoring,laser wheel aligners,f1 technology with race coatings and bearings.ANYTHING.The karts can get quite expensive, sodikart supplies a very good chasis.Anyone want anything let me know

Edited by hefer81

I use to race go carts a few years back but not on the black stuff I joined Dirt Trackers Cart Club, the track was made from the old speedway surface from Claremont Speedway (W.A) Had a KT100 cart cost me $1800 and to race a session all up about $1000 to $1200. Thats how you learn to throttle steer, no better action than the lack of traction :) Ohhh an the wave of mud when you start rear of field when on P's

http://www.dirttrackerskartclub.com.au/photosold.html

I was lucky enough to race at one of the Adelaide F1 GPs in a super kart. And the guy who won ( cant not remember his name ) set lap times good enough to start off the second last row in the F1 race.

Yeah superkarts seem a little insane, can't believe no seat belts or roll cage at that speed.

Yeh they are the 250cc 6sp G/Box Karts and yes they have balls! Over here in Adelaide at the last meeting there were 5 or so of them and they finnished with 1 starting the final, we have a race meeting on saturday but my mate he only races a 125Max but at least we get about 25-30 entries each round which makes it ALOT more fun. But his Club Car is nearly finnished and ready to race that next year so if anyone want a REALLY nice 125Max Superkart, his will be for sale, comes with Michron Dash(on steering wheel) 2 nose cones (1 for better straight line speed and 1 for corners) and all the latest gear, and not to mention many many spares, PM for details if interested.

This is what it looks like but has actually got the updated side pods(ie looks alot better)

Edited by Deluxe

ohhh my goddddd 'yes i had to type it out it's that amazing' check this!:

Shifter 125

0 - 60 mph: 3.0 sec

0 - 100 mph: 6.0 sec

Top Speed: 125 mph

Cornering grip: 3.0g

Engine: 125cc 2 stroke water cooled = 32 - 49 hp

Price: $8,000.00

Unbelievable performance at a great price. No doubt, the best bang for the buck. This is not for faint at heart though. You must have ba@&s to drive one of these and bigger ones to take it to the limit. It is not recommended that your start karting with a shifter 125. Learning curve is very high as you can shift upto 30 times a lap. Most sprint tracks are sub 1 minute laps, so you could be shifting every 2 seconds. Stamina comes in to play as the laps counts up. If you are not in shape, holding on towards the end of a race becomes a challenge.

Europeanracing.jpg125shft.JPG

TMICC.JPG125shftbrake.JPG

& THEN!!

Superkart 250

0 - 100 mph: 4.0 sec

Top Speed: 150 mph

Cornering grip: 3.0g

Engine: 250cc 2 stroke water cooled = 70 - 90 hp

Price: $16,000.00

This is scary stuff. Only a handful of drivers will even try this. These karts will out perform any road and formula car with exception of Formula 1 and Champ Car.

250%20kart%203.jpg250%20kart%202.jpg

Airborn!

250%20kart%201.jpg

My skyline feels so slow already...

Edited by geno8r
Yeah superkarts seem a little insane, can't believe no seat belts or roll cage at that speed.

Yeah my team mate went onto V8 supercar after the supercarts and he reckon almost fall asleep in them compared to supercarts. I remember one guy on that same day at Phillip Isl was clocked at 316kl/h in the drizzle on the sat Qualify session- now thats nuts :D

I raced at Indy in the supercarts race as did my yeam mate and I was lucky enogh to avoid that massive pile up be he wasnt and now carries around a few decent pins in his arms. :D

Edited by gtr660hp

Tried the new rotary engine for karts last night, ohhh man are these thing fast!!!!!! The designer was here and brought a 60 HP model it was unbelieveable how fast it is all up it was 60hp and 165 kg these things are going to be huge in the kart sceen

maybe over there but here they are only 1500$ more than a rotax FR125.

As i said we had the designer out here and he was great to speak with. These will i am sure take over the kart world. And they are cheaper to rebuild that a rotax as they only need seals no pistons or liners etc etc.

I was on the track against a TKM shifter and he didnt have a chance just hosed him utterly.

  • 2 years later...
Just got back into racing karts after a year off and missed every moment of it.....If you are considering getting into it then check out the local tracks and see what the biggest classes are ( usually rotax, clubman or J's) Be wary that with a rotax you need to upgrade to a B grade license b4 you can start from the front of the grid. They usually put C graders and P platers to the rear, this is why a Clubman would be a good start. Don't expect to fast straight away as there is more to setup with chassis than you may think....the first year is usally just for learning :) Re. Turbo tim....where are you located? cause if you are in sydney i can hook you up with a kart dealer to talk to. :rofl:
Edited by sle

hey jeremy,

where in sydney are you?

i been racing karts just for fun, bought one off ebay for around 1500, spent maybe 2000 on it all up now.

picton track is pretty good 25 for the day and i think 30 for your yearly licence.

tho, beware, kart tracks are starting to go by the aka ruling and will need a clutch by January 2009

hey jeremy,

where in sydney are you?

i been racing karts just for fun, bought one off ebay for around 1500, spent maybe 2000 on it all up now.

picton track is pretty good 25 for the day and i think 30 for your yearly licence.

tho, beware, kart tracks are starting to go by the aka ruling and will need a clutch by January 2009

yeh i been to picton a few times but used their karts, best place i been to. And is it worth racing just for fun ?>. i mean is it really hard to get anywhere with it ?... this is the kart i was thinking bout http://cgi.ebay.com.au/BRAND-NEW-BLACK-6-5...id=p3911.c0.m14

Edited by sle

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...