Jump to content
SAU Community

Recommended Posts

What happens if im test driving n the screw falls off in the middle of it??

hehehe

Do u start off with the Screw all the way Out??? i can't remember where it was Pre_Set when i first got it.. so yeh

Cheers

Edited by Black_CSR
  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

wouldn't have to change the bov, unless it starts leaking when you get on boost. the stock bov is designed to leak at all times. it has a hole in it to do so. this leaking also helps it hold higher boost as the leaking air pushes down on the top of it to keep it closed. i blocked mine up and it started leaking boost so i unblocked and it doesn't spike. but going to an aftermarket bov will stop it leaking any boost and make it spool up a touch quicker. (its like trying to fill a bucket with a cup with a hole in it. plug up the hole and you will fill the bucket quicker).

you would need an aftermarket ecu to get rid of boost cut. and remember that 14psi on a high flow will give more power than 14psi on stock turbo.

Edited by mad082
wouldn't have to change the bov, unless it starts leaking when you get on boost. the stock bov is designed to leak at all times. it has a hole in it to do so. this leaking also helps it hold higher boost as the leaking air pushes down on the top of it to keep it closed. i blocked mine up and it started leaking boost so i unblocked and it doesn't spike. but going to an aftermarket bov will stop it leaking any boost and make it spool up a touch quicker. (its like trying to fill a bucket with a cup with a hole in it. plug up the hole and you will fill the bucket quicker).

you would need an aftermarket ecu to get rid of boost cut. and remember that 14psi on a high flow will give more power than 14psi on stock turbo.

Thanks mate, exactly what I needed to know.

Well at the moment.. i'm running 12 Psi.. n i'm not getting any Fuel Cut for some reason.. so i'm not sure if i have a Stock Ecu n it has a Rev Limiter on it as well...

I remember when i did my first Test Run when the Boost Controller started working.. it went upto 15 psi.. but didn't cut out.. but i didn't give it stick till redline.. just suprised it went up that high.. n did Pop when i changed gear..

What if i keep it on 12.. n get FMIC.. will that b ok???

Oh yeh Evil_weevil.. u going to Antilag Cruise this weekend??? if u r u could sort my boost problem when i c ya hehe

-SeSaR

Edited by Black_CSR

depends on mods. it is based off air flow, not boost pressure. i was running 13psi with stock dump and cat with not boost cut. the day i put on the dump and cat boost cut was kicking in at 1/4 throttle so i had to wind the boost down.

So Mad082..

As long as I don't get any Boost Cut... it should b ok to Run??

I have a HKS Filter n Zorst 2 1/2 wif Cat n High Flow Muffler.. was driving tonite n was cruising along in the freeway in 5th doing about 90... so i put it in 3rd n give it some stick n c how it go..

It went Hard Alright... but the Boost went upto 13-14 psi.. i'm guessin the Cold night gave it extra PSI

didn't cut out though.. kept going hard.. then had a played around wif this SS... didn't Cut out... Caned it up 2 about 4th then slowed down was worried it mite POP..

-SeSaR

Edited by Black_CSR

yeah should be cool. just have to watch out that it doesn't do it when the engine is cold, but you shouldn't be driving it hard when the engine is still cold. when i have the boost at about 13psi i get boost cut until the pipes heat up. the engine can come nearly up to temp and if i give it a quick boot in 3rd it will start to rev up then cut. it will only do it once or twice, then the cooler and piping comes up to temp and it won't do it again.

it only did it in the morning on the way to work... and on the way to the dyno run, so i had to wind the boost down which i was a bit annoyed about cause i took it for a spin the night before to see if it was going to do it and it didn't.

Sounds Good.. well i put it Back on the way it was before.. which is connect it to the Stock Selonoid.. in which it's suppose to Run Stock Boost n gave it a quick run n it went only up 6.5psi n won't get any higher.. where it used 2 b 8psi.. so that kinda annoyed me..

but anyway i'll put it back on n c how it runs for the Cruise on Sat Nite..

SeSaR

This is getting f*kkin rediculous

You know what is fcukin ridiculous, people like you who think everyone knows how to use the search function from the word go. fcukin ridiculous. Were you born a dickhead or do you work really hard at being one. Grow up Kris.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...