Jump to content
SAU Community

Recommended Posts

The car is coming back home from the panel beaters so I need the last of my spare parts gone to make space for the car again

Six point roll cage to suit R32 with rear cross brace and above windscreen brace. $650 padded.

Brand new right hand sill $200. New from nissan cost $330

R33 GTR/R34gtt Ohlins Shocks $700

R32 gtr swaybars front and rear SOLD

Greddy profec boost controller and greddy boost gauge with cup $300

Side skirts in poor condition suit gtst $20

Auto meter boost gauge $50

Doors. Two straight doors with no internals and two damaged doors with internals SOLD

Inner gaurd liners and middle piece for r32 gtr $200 Very hard to find not damaged. Dirty in the photo because I could only hose them down in the dark. They are not cracked.

RB20det engine with exhaust manifold, two inlet manifols and no coil packs or CAS. SOLD Suit rebuilt I never started it after I bought it from the wreckers and its sat outside for a while taking up space.

Set of 3 piece wheels 17x9 gtr offset. 5 spoke with small dish. Sorry guys about the price change but what I thought was a big dent/buckle is only a slight a 2 inch section slightly pushed in hardly noticable to the eye in one rim. Two tyres are good. SOLD

Standard R32 gtst shocks and springs SOLD

Front sturt tops with all rubbers suit r32/33 $40

R32 Gtr turbos one blown one good $125 pair with actuators

R32 Gtr turbos both in EC $400 pair with actuators

R32 gtst bonnet with home job ground vents in it $50 suit track/drift car

R32 gtst turbo in pieces missing exhaust housing $30

R32 rear bumper $25 Plastic moulded extensions broken for the brackets on one side

Open to offers! I need all of this gone!

Call to come and inspect.

Gareth

0417370869

post-1670-1148472537.jpg

post-1670-1148472568.jpg

post-1670-1148472593.jpg

post-1670-1148472613.jpg

post-1670-1148472632.jpg

post-1670-1148472651.jpg

post-1670-1148472673.jpg

post-1670-1148472696.jpg

post-1670-1148472719.jpg

post-1670-1148473273.jpg

post-1670-1149068589.jpg

post-1670-1149068709.jpg

post-1670-1149068743.jpg

post-1670-1149068779.jpg

how old is the boost controller, model? Is the boost gauge mechanical or electronic? Do they come with all harnesses and required bits...cheers.

can i get pics? Im very interested :)

Side skirts. One sets original r32gtr and other replica set $175 the lot

Inner gaurd liners and middle piece for r32 gtr $200 Very hard to find not damaged

Edited by Bl4cK32

Side skirts in poor condition suit gtst $50

So are these GTST sideskirts or GTR side skirts? And what do you mean by poor condition? Do you have the rear pods too?

If so can i get some better pics pmed or to xrhettx at hotmail dot com?

Thanks

I have a complete head but don't know the condition. I guess its good. $75

I will post up the photos of the liners tonight.

No indiators

Side skirts to suit gtst are for a gtst and are in poor condition $25 now

  • 2 weeks later...

I just pulled it apart to have a look. Was going to do my own high flow job since I work in a gas turbine workshop. It is just a normal turbo in pieces nothing special to look at. Ended up putting a rb26 in the car instead.

Engine is sold.

Wheels are sold.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...