Jump to content
SAU Community

R32 Diff Set-up

GTAAAH
 Share

Recommended Posts

GTAAAH Mentor

GTAAAH

Posted
Posted

just wondering if the 32 gts-t type M came out with factory LSD or something? I dont have the garage space to put it up on axle stands (to spin the wheels) or enough axle stands for that matter. I just noticed that when i take off in a hurry or im warming up my tyres it leaves two marks and not one. Weirded me out as i know very few relatively recent production cars came with LSD. If its not LSD is it some kind of traction control setup or something? Weirder still is that my HICAS messes up all the time and i lose power steering, until i take off with some revs and spin the wheels a couple of times at which stage it fixes itself! is there a HICAS sensor anywhere near any part of the drivetrain?

Thanks, i dont have a workshop manual or a driver manual so SAU is my only source for some things :P

Link to comment
https://www.sau.com.au/forums/topic/118035-r32-diff-set-up/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Blue slip

      By Duncan · Posted

      You just need a different blue slip shop (preferably one you regularly use as a mechanic), and make sure the coil overs are as close as possible to standard height
    • Duncan
      Ethanol Content Sensor - Always at 11%?

      By Duncan · Posted

      yeah the sugar refining companies were pushing for the same in Oz originally, all fuels were going to have 10% ethanol to make them "cheaper" (noting, that the loss in l/100 might be greater than the decrease in price). I guess they won that fight in Canadia
    • thatjawncrazy
      Another "where do these lines and plugs go" RB25DET question

      By thatjawncrazy · Posted

      GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • Kinkstaah
      Ethanol Content Sensor - Always at 11%?

      By Kinkstaah · Posted

      So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Stringycheese
      Blue slip

      By Stringycheese · Posted

      Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
×
×
  • Create New...