Jump to content
SAU Community

Recommended Posts

Ah.... I see, completely useless on the street then?

Sounds rather unsafe for street use too... what if you accidently push it in and need to use the hand brake?

hey mate

alot of peeple have them in there car for street dont know why but they are primarily to drift

and s13 s14 s15 ae86 r32 r33 rr34 all have the same button on the handbrake so they will fit over any of them and heres installation instructions for anyone interested

thanks

All you need is a flathead screwdriver, it should only take a minute to install.

1 Remove handbrake cover, (slide/twist it forward)

2 Using a flathead screwdriver flip the tabs on each side of the handbrake out in order to drop the spring (the standard handbrake button will sink in and stay)

3 Slide the handbrake cover back on

4 Push the drift button onto the standard one

When the drift button is pushed in it will leave the handbrake unactivated even when pulled up, when the drift button is pulled out the handbrake will lock when pulled up.

hey mate

alot of peeple have them in there car for street dont know why but they are primarily to drift

and s13 s14 s15 ae86 r32 r33 rr34 all have the same button on the handbrake so they will fit over any of them and heres installation instructions for anyone interested

thanks

All you need is a flathead screwdriver, it should only take a minute to install.

1 Remove handbrake cover, (slide/twist it forward)

2 Using a flathead screwdriver flip the tabs on each side of the handbrake out in order to drop the spring (the standard handbrake button will sink in and stay)

3 Slide the handbrake cover back on

4 Push the drift button onto the standard one

When the drift button is pushed in it will leave the handbrake unactivated even when pulled up, when the drift button is pulled out the handbrake will lock when pulled up.

they don't fit just any car! i have bought one in the past to suit an s13 and it didn't fit my 32, i later found out that s13 ones r different to r32's!

  • 2 weeks later...

I am trying to get the handbrake cover off and it won't budge.

Does anyone know if there is a trick to them? There is a ring at the end that I started to pull out, but it sounds like it's attached to the spring.

It's a leather cover, but I think all the 32's are...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...