Jump to content
SAU Community

Recommended Posts

Flying Performance International is the only official online Hybrid dealer

Flying Performance International official website www.flyn.com.au

Check out the Hybrid official website at www.powerdigger.com

LOGO10.JPGflying%20banner2.JPG

logo%20top%205.JPG

a3_1_b.JPG90_1_b.JPG

We are doing a stock clearance on this RED Hybrid GT Spec Intercooler KIt for $599.

We only have 5 left, so hurry.

*All kit contains one latest Hybrid GT SPEC Tube & Fin Intercooler, all necessary brackets, screws & nuts, silicon hoses, aluminium piping and stainless steel racing clamps

*All piping kit comes with a step-by-step pictorial instruction for easy DIY installation

* 1 year manufacturer warranty

Payment Instruction

Postage & Handling = Free freight Australia wide, required $40 freight insurance for possible loss or damage in transit

PAYMENT TO : FLYING PERFORMANCE INTERNATIONAL PTY LTD

ST. GEORGE BANK LIMITED

BRANCH NO. : 112-879

ACCOUNT NO. : 065766824

PLEASE you must give the bank your forum user name as the description of the transaction. That way it shows up on our bank statement with the amount you have sent us. So we can match your order with your payment otherwise there may be a delay for us to match the payment to your order!

After you have made the payment, please you must e-mail us with your payment date & amount, your name & postal details.

Once we receive your payment, we will inform you and send it at the same time.

It will be packed and sent securely in boxes or bubble padded bags for best protection.

Optional extra

93_1_b.JPG $49 Flying bov

05_1_b.JPG $49 Flying boost controller

1b_1_b.JPG $29 Flying boost controller

5c_1_b.JPG $229 + $25 extra freight

29_1_b.JPG $88 HKS style oil cooler (SOLD OUT)

b2_1_b.JPG $59 Flying steering wheel spacer

e7_1_b.JPG $49 Flying ground earth wire

e1_1_b.JPG $49 Flying engine start button

HSDlogo.gifHDS15HR.jpg

HSD Suspension

HSD coil-overs are used by 2005 Drift Australia champion Darren Appleton and many other prominent drivers in Australia. Now available only in the premium HR series, HSD coil-overs feature 55mm heavy-duty full-tapped dampers with 15-step damping adjustment. All models feature pillow-ball top mounts for easy installation and maximum control. Models with strut-type suspension also feature camber adjustment, while all models feature adjustable base height and spring seat height.

HSD coil-overs are supplied with spring rates intended for club-level motorsport, drift and street driving. Harder or softer springs are also available at just $100 a pair. All rates from 3kg/mm to 14kg/mm are kept in stock.

All HSD coil-overs come with a 12-month warranty against manufacturing defects.

NISSAN

S13 Silvia or 180SX $1549

S14 200SX $1549

S15 200SX or Silvia $1549

R32 Skyline GTS & GTS-t (GTS-4 available to order) $1549

R33 Skyline GTS25 and GTS25t $1549

R34 Skyline GT and GT-t $1549

R32 GT-R $1549

R33 GT-R $1549

R34 GT-R $1549

Z32 300ZX and Fairlady Z $1549

Z33 350Z $1549

TOYOTA

JZX90 Mark II, Cresta, Chaser $1549

JZX100 Mark II, Cresta, Chaser $1549

JZA70 Supra (Also GA-70, MA70, MA71) $1549

JZA80 Supra $1549

SXE10 Altezza and Lexus IS200 **NEW** $1549

SUBARU

GC8 Impreza WRX (MY94 to MY00) $1599

GDB Impreza WRX (MY01 to MY02) $1599

GDB Impreza WRX (MY04 on) $1599

SG5 Forester $1599

MAZDA

FC3S RX-7 (Series IV and V) $1549

FD3S RX-7 (Series VI to VIII) $1549

MITSUBISHI

CP9A Lancer Evolution (IV to VI) $1549

CT9A Lancer Evolution (VII on) $1549

HONDA

EG Civic $1549

EK Civic $1549

DC2 Integra $1549

DC5 Integra **NEW** $1599

AP1 S2000 $1549

Edited by [FLYN]
  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

The is for the Hybrid GT Spec intercooler with RED piping kit only, we are running out of them, that is why we selling beloew cost price. hurry.

3 RED kits have been gone already.

DO u still have any left interested. Live In brisbane. Will pay via Direct Deposit.

Just let me know if u have any than I'll pay.. and than u can send it up.

Want to put it on my r32 skyline gts-t. HAs the RB20 in it, Should b ok to fit on. Right.?

Thanx

DO u still have any left interested. Live In brisbane. Will pay via Direct Deposit.

Just let me know if u have any than I'll pay.. and than u can send it up.

Want to put it on my r32 skyline gts-t. HAs the RB20 in it, Should b ok to fit on. Right.?

Thanx

yeh we still got a couple left. It will certainly fit your car no problem. thanks alot.

Whats the email addres I nee dto send to wen money is sent.

You can confirm your payment either through sending us a PM or sending a email to [email protected].

cheers

we are sorry that we thought we have sold out the Hybrid Red intercooler kit, but we actually have 20 more red kits available, it was sitting at the back of our warehouse and we accidentally missed them.

i am interested in buying one of the hybrid red kits is there any still available can u send an email to [email protected] with the details thanx

jeremy

i am interested in buying one of the hybrid red kits is there any still available can u send an email to [email protected] with the details thanx

jeremy

Hey Jeremy

PM sent.

Cheers




  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...