Jump to content
SAU Community

Recommended Posts

not loud loud, sheesh

a few factors. first off i had an avcr in the 33, and i wasnt happy how it 'holded' boost or ramped up, it just wasnt good enough. and also i went and visited paul & stacey diemar (who run TWOOGLE) and they went from the avcr to the ID3 and gained power everywhere! just by changing the boost controller. also the ID3 ramps up faster, and holds boost solid all the way to redline. plus the ID3 shows boost in psi & bar ;)

Yeah the AVCR is crap no doubt about it

The ID3 has the same solenoid as the ID3...it just doesnt have the pretty display Ricer :wub::P

I say the I colour is good cause it has gear specific boost and a whole bunch of other stuff wich I forgot. also having the power meter in it is pretty cool, more out of curiosity to see if it works than anything else! It aslo uses the same solenoind!

anyway, im going kayaking up the canals :wave: speakl to you all alter

byes

I think you are a mommies boy!

ok when?

when i get the car lol. and when smokey gives me the guage! lol.

nah ill get introuble again :P

nooo, i believe u havnt paid for it yet ;).............ok ok yes u have :P

mmm buzzy fuel pumps :wub:

hahaha.. I love getting in trouble. Right now our VP isn't speaking to me, I think he's off in the corner having a cry. Poor bugger (not!!!!)

hmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm fuel

;)

I think you are a mommies boy!

when i get the car lol. and when smokey gives me the guage! lol.

hahaha.. I love getting in trouble. Right now our VP isn't speaking to me, I think he's off in the corner having a cry. Poor bugger (not!!!!)

hmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm fuel

How is going Kayakin make me a mummers boy?

I put my dog on the front and went around the canals....

? :P:wub:

I think you are a mommies boy!

when i get the car lol. and when smokey gives me the guage! lol.

hahaha.. I love getting in trouble. Right now our VP isn't speaking to me, I think he's off in the corner having a cry. Poor bugger (not!!!!)

hmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm fuel

bahahahhahahahahahahahahahahahahahahahahahahahahaahhahahahahahah *breaths* bahahahhahahahahahahahahahahahahahahahahahahahahaahhahahahahahahahahahhahahahaha

ahahahahahahahahahahahahahahahaahhahahahahahah

:wub:

How is going Kayakin make me a mummers boy?

I put my dog on the front and went around the canals....

? :P:P

;)

;)

How is going Kayakin make me a mummers boy?

I put my dog on the front and went around the canals....

? :P:wub:

the way you talk gives it away.

don't you have a job?

oh and you look camp. I've seen photos, I know.

bahahahhahahahahahahahahahahahahahahahahahahahahaahhahahahahahah *breaths* bahahahhahahahahahahahahahahahahahahahahahahahahaahhahahahahahahahahahhahahahaha

ahahahahahahahahahahahahahahahaahhahahahahahah

:P

yeah he's so homo!

apparently even the dunces don't like him now.

the way you talk gives it away.

don't you have a job?

oh and you look camp. I've seen photos, I know.

stop it stop it! my sides hurt :wub::P

Liz, you should have been in here yesterday when we all deviated to BC to pay out some dickhead selling his 'clubby lookalike' ;)

Question for ya'll QLD folks

How much is BP Ultimate in QLD?

In Syd today it is 1.31.

Yesterday it was 1.20.

Ummmm... well fuel prices in our side of town rose over 10 cents overnight. Bastards! :P

stop it stop it! my sides hurt :wub::P

Liz, you should have been in here yesterday when we all deviated to BC to pay out some dickhead selling his 'clubby lookalike' ;)

Ummmm... well fuel prices in our side of town rose over 10 cents overnight. Bastards! :P

What did it rise from?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
    • Could be correct. Meter might be that far out. Compare against a known 5 ohm 1% resistor.
    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap.  (edit: I went out and did it right now, the line I had chosen did appear to have no vacuum on it, it used to go to the front of the intake, I've now completely blocked that one off at the bracket that holds several vacuum lines by the firewall.  I T'd into the vacuum line that goes from that bracket to the vacuum pump at the front of the car, but no change in the MAP readings).  Using the new vacuum line that has obvious vacuum on the hose, im still only getting readings between -6.0 and -5.2.  I'm wondering why the ECU was detecting -5.3 when nothing was connected to the MAP nipple and ECU MAP selected as the source. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
×
×
  • Create New...