Jump to content
SAU Community

Recommended Posts

im use to it.

at the end of the day, the people that 'pwn' me are just miesly gtst drivers :laugh:

oh my god! I can't believe you just said that

GTR attitude is alive and well in QLD doesn't it!!! lol

Just coz you have a GTR does not automatically make you a legend.

aww i think shane is feeling the HEAT of so much pwning.. lets hope he doesn't blow a gasket :laugh:

ok thats enough from me :)

liz what happened to your car?

farken hell isaac ur on fire :P

i must apploud you on your fine efforts *claps hands*

farken hell isaac ur on fire :laugh:

i must apploud you on your fine efforts *claps hands*

*takes a bow..

ok seriously ive paid out enough.. imagine you're not having the best of weeks so good luck with the repair job

aww i think shane is feeling the HEAT of so much pwning.. lets hope he doesn't blow a gasket :laugh:

ok thats enough from me :)

liz what happened to your car?

he's a good shane! I'm sure he can give it out as much as he takes it!

well i spent 3 months and alot of money building a track spec s13 silvia and 10days after we had the engine (s14 engine) and brake (s15 brakes) set up up and running i got rear ended and smashed into the car infront writting the whole thing off :P

hey shane... do you think i should go and take my fuel pump out of the wreck as the fuel tank leaked and there is no petrol in there... should i take it out to preserve it or will it be fine?

nvm...

So... how high can u rev a RB26 safely shane?

7k man on a std one, but the odd rev limiter dance doesnt hurt, if u've got ye ole 2wd switch :laugh:

im assuming ur asking as you like to go for some regular 'spirited drives', i dont know how u drive, but if it were me, i wouldnt go holding the revs at say ~6k+ constant, caus in the end it's gonna shake itself apart

oh my god! I can't believe you just said that

GTR attitude is alive and well in QLD doesn't it!!! lol

Just coz you have a GTR does not automatically make you a legend.

but its true what i said, no gtr owner has 'pwned' me at any stage, yet the gtst owners always find something...

hey shane... do you think i should go and take my fuel pump out of the wreck as the fuel tank leaked and there is no petrol in there... should i take it out to preserve it or will it be fine?

she'll be right :laugh:

P.S if i had knowledge of this issue, of course i wouldnt have left it out of fuel, plus i offered to refund the mula, fool...but serously, have u heard of that happening before? if not, how do others store their used pumps?

:P oh noes :) and you had insurance?

nope.. and I'm so pissed off that I didn't.. but the guy who hit me had insurance.

well i did have insurance.. but only third party property and fire and theft! As it was a track car and I barely drove it on the road .. just this one day, my other car needed to get some work done so I drove the silvia! :laugh:

7k man on a std one, but the odd rev limiter dance doesnt hurt, if u've got ye ole 2wd switch :laugh:

im assuming ur asking as you like to go for some regular 'spirited drives', i dont know how u drive, but if it were me, i wouldnt go holding the revs at say ~6k+ constant, caus in the end it's gonna shake itself apart

but its true what i said, no gtr owner has 'pwned' me at any stage, yet the gtst owners always find something...

come down to sydney and i'll set up a few drivers for a pwning!

Dave (who's up in QLD with bunta and anna at the moment) is an insane driver! one of the best!

I had a 2wd switch but I ditched it when I had my tourque split controller installed. Kinda wishing I didnt now however, but apparently taking the fuse out under the dash is much dodgyness and your far better off removing the fuse from under the hood.

she'll be right :laugh:

P.S if i had knowledge of this issue, of course i wouldnt have left it out of fuel, plus i offered to refund the mula, fool...but serously, have u heard of that happening before? if not, how do others store their used pumps?

hahaha

they just wrap them up, but It hink it's better to keep them submersed to be sure!

I might go and get it.. it'll hopefully get the insurance agents to hurry up if I head in there and start taking parts of the car lol

im assuming ur asking as you like to go for some regular 'spirited drives', i dont know how u drive, but if it were me, i wouldnt go holding the revs at say ~6k+ constant, caus in the end it's gonna shake itself apart

Thanks for backing me up on that one Shane... :)

Tola ya so Ian :laugh: <<---always wanted to use that :P

nope.. and I'm so pissed off that I didn't.. but the guy who hit me had insurance.

well i did have insurance.. but only third party property and fire and theft! As it was a track car and I barely drove it on the road .. just this one day, my other car needed to get some work done so I drove the silvia! :laugh:

come down to sydney and i'll set up a few drivers for a pwning!

Dave (who's up in QLD with bunta and anna at the moment) is an insane driver! one of the best!

yes he was at big dave's place for new years, which i was also there...

although u gotta admit, his machine is quite well sorted! f50's on the front, ap's on the back, amongst other goodies i spied...

but in the end, i'm only 19 with very little spirited driving experience, now b4 ny1 goes flaming me, i'm already booked for the next 2 track days

I had a 2wd switch but I ditched it when I had my tourque split controller installed. Kinda wishing I didnt now however, but apparently taking the fuse out under the dash is much dodgyness and your far better off removing the fuse from under the hood.

hows it dodgy? all it does is disable the abs, but all you want rwd for is to do a static burnout at the drags

you've got my attention now liz, how good?

dave? very good! lol

yes he was at big dave's place for new years, which i was also there...

although u gotta admit, his machine is quite well sorted! f50's on the front, ap's on the back, amongst other goodies i spied...

but in the end, i'm only 19 with very little spirited driving experience, now b4 ny1 goes flaming me, i'm already booked for the next 2 track days

hows it dodgy? all it does is disable the abs, but all you want rwd for is to do a static burnout at the drags

he's a legend! I love him!

yeah but it's easier to drive a slow car fast than it is to drive a fasst car fast! so as well as his car being sorted, his driving is too! :laugh:

and shane.... you are young and no matter what your driving experiance is now, you'll pick up tips and the like every time you go out!!! Even the smallest things!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers)
    • One other thing to mention from my car before we reassemble and refill. Per that earlier diagram,   There should be 2x B length (40mm) and 6x C length (54mm). So I had incorrectly removed one extra bolt, which I assume was 40mm, but even so I have 4x B and 5x C.  Either, the factory made an assembly error (very unlikely), or someone had been in there before me. I vote for the latter because the TCM part number doesn't match my build date, I suspect the TCM was changed under warranty. This indeed led to much unbolting, rebolting, checking, measuring and swearing under the car.... In the end I left out 1x B bolt and put in a 54mm M6 bolt I already had to make sure it was all correct
    • A couple of notes about the TCM. Firstly, it is integrated into the valve body. If you need to replace the TCM for any reason you are following the procedure above The seppos say these fail all the time. I haven't seen or heard of one on here or locally, but that doesn't mean it can't happen. Finally, Ecutek are now offering tuning for the 7 speed TCM. It is basically like ECU tuning in that you have to buy a license for the computer, and then known parameters can be reset. This is all very new and at the moment they are focussing on more aggressive gear holding in sports or sports+ mode, 2 gear launches for drag racing etc. It doesn't seem to affect shift speed like you can on some transmissions. Importantly for me, by having controllable shift points you can now raise the shift point as well as the ECU rev limit, together allowing it to rev a little higher when that is useful. In manual mode, my car shifts up automatically regardless of what I do which is good (because I don't have to worry about it) but bad (because I can't choose to rev a little higher when convenient).  TCMs can only be tuned from late 2016 onwards, and mine is apparently not one of those although the car build date was August 2016 (presumably a batch of ADM cars were done together, so this will probably be the situation for most ADM cars). No idea about JDM cars, and I'm looking into importing a later model valve body I can swap in. This is the top of my TCM A couple of numbers but no part number. Amayama can't find my specific car but it does say the following for Asia-RHD (interestingly, all out of stock....): So it looks like programable TCM are probably post September 2018 for "Asia RHD". When I read my part number out from Ecutek it was 31705-75X6D which did not match Amayama for my build date (Aug-2016)
    • OK, Step 3, if you need to remove the valve body, either to replace it, the TCM, or to do a more complete drain.  First, you need to disconnect the TCM input wires, they are about half way up the transmission on the drivers side. One plug and the wires are out of the way, but there is also a spring clip that stops the socket from sliding back into the transmission. On my car the spring clip was easy to get, but the socket was really stuck in the o-ring of the transmission housing and took some.....persuasion. You can see both the plug to remove (first) and the spring clip (second) in this pic Incidentally, right next to the plug, you can see where the casting has allowance for a dispstick/filler which Nissan decided not to provide. there is a cap held on with a 6mm head bolt that you can remove to overfill it (AMS recommend a 1.5l overfill). Final step before the big mess, remove the speed sensor that is clipped to the valve body at the rear of the box.  Then removal of the Valve Body. For this the USDM Q50 workshop manual has a critical diagram: There are a billion bolts visible. Almost all of them do not need to be removed, just the 14 shown on the diagram. Even so, I both removed one extra, and didn't check which length bolt came from which location (more on that later....). Again it is worth undoing the 4 corners first, but leaving them a couple of turns in to hold the unit up....gravity is not your friend here and trans oil will be going everywhere. Once the corners are loose but still in remove all the other 10 bolts, then hold the valve body up with 1 hand while removing the final 4. Then, everything just comes free easily, or like in my case you start swearing because that plug is stuck in the casing. Done, the valve body and TCM are out
    • OK, so if you are either going for the bigger fluid change or are changing the valve body which includes the Transmission Control Module (TCM), first you should have both a new gasket 31397-1XJ0A and a torque wrench that can work down to 8Nm (very low, probably a 1/4 drive one). You can probably get by without either, but I really didn't want to pull it all apart together due to a leak. First, you now need that big oil pan. The transmission pan is 450 long x 350 wide, and it will probably leak on all sides, so get ready for a mess. There are 24x 6mm headed bolts holding the pan on. I undid the 2 rear corners, then screwed those bolts back in a couple of turns to let the pan go low at that end, then removed all the middle bolts on each side. Then, undo the front corner bolts slowly while holding the pan up, and 80% of the fluid will head out the rear. From there, remove the remaining bolts and the pan is off. You can see it is still dripping oil absolutely everywhere...it dripped all night.... I got another couple of litres when I removed the pan, and then another few when I removed the valve body - all up another 4l on top of the 3 already dropped in step 1.
×
×
  • Create New...