Jump to content
SAU Community

Recommended Posts

No of course not...I don't tell anyone what I've done to my car :P

Yes I am and yes you can feel it...and the clutch too if ya want :O

i dont spose u'd drop the brand of it then? or the brand u'd get if u were going to get one :(

Geebus I hope you are talking about the clutch......... :cheers:

oh dear dave's got his mind in the gutter again :D

morning karen :cheers:

looks good too john, call me when you want some professional photos and i can hook you up, that applies to everyone also.

my photos are close enough to professionalism

just got to get around to opening them up now in Adobe Photoshop and editing them with more colour and lighting in certain areas.

REAL PROFESSIONAL PHOTOS I DONE -

http://www.skylinesaustralia.com/forums/in...t&p=2780330

those have been touched up in photoshop.

What do you mean by that?? If I was going to replace it you mean?

what brand of clutch is your :cheers:

P.S dave ur a big girl, u whinge more than a woman during...no i wont say that :D*runs and hides*

we discovered yesterday that shanes not only ghey

but also likes 14yr old girls at servos....

had to go let off some steam in the toilet while we were waitin for ian to finish his roll.

lmfao!!!

dude she was 16, get it right! :cheers:

http://www.news.com.au/story/0,23599,21025660-2,00.html

P-PLATE drivers will be given no second chances before having their licence cancelled under the toughest driving conditions yet being considered by the New South Wales Government.

bahaha sux to be them :cheers:

I dunno what Ian has

yeah ian's got a nismo twin plate

http://www.news.com.au/story/0,23599,21025660-2,00.html

P-PLATE drivers will be given no second chances before having their licence cancelled under the toughest driving conditions yet being considered by the New South Wales Government.

I think this is a good idea to some extent, but in saying that, the Government needs to provide a place where young drivers CAN drive fast (I know you can already do this at Eastern Creek, but I'm saying this more in relation to the Qld Government, because if NSW gets this proposal passed you can bet Qld will be very quick in following suit).

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
    • And yes with a full tank it will hit limiter free revving or driving 6B6CDF6E-4094-426D-A9CB-6C553475FE36.mp4
×
×
  • Create New...