Jump to content
SAU Community

Recommended Posts

yeh but she still keeps her legs open and willin to take husbans away from their wives.

feel free to elaborate on this experience you've recently had yourself :)

lol

:O WELL I NEVER!

ha ha ha

but she's hot... i don't care how she spreads em.. she's an effin fox!

Paris has a pig eye that squints... she can go sodomise herself

LOL

When it comes down to it, Angelina is hotter and I think she'd go OFF in the sack

Paris clearly just lays there

dude the gtr IS the better car if its running fine, why would people buy gtr's if they werent any good? the only reason i do it is to fire up all the gts-t owners, it gets them going EVERY time. reason my gtr broke, was it had the dodge done on it and spun the big end, and being a 17yr old performance car u should expect that.

i previously owned a gts-t and had spent ~15k on it, all it needed was the built motor and i opted for the gtr, as it would be the safer option (doubt thered be much traction in a 750hp rwd car lol)

Theres no traction in a 750hp GTR either

Daves car changes lanes by itself at 320kw at the wheels. It might as well be RWD

But dont worry thinking that a GTR can put down any amount of power is a common nooblett mistake dont feel bad :)

i do actually have a doll on my desk ha ha ha

But it's a Corpse Bride so her backs already cracked :)

USELESS!

there is always decapitation..........come on people

oh a baseball bat!! I like where this is heading!!!

u gonna wrap razor wire around that baby or what?!

:O

mike - "no, but you can have his business card

anna - "oh thanks :) "

*mike beats her with bat round the head* now dont forget it :bunny:

Theres no traction in a 750hp GTR either

Daves car changes lanes by itself at 320kw at the wheels. It might as well be RWD

But dont worry thinking that a GTR can put down any amount of power is a common nooblett mistake dont feel bad :O

thanks andy, u make me feel all warm and fuzzy inside :)

*waits for the gay comments*

don't get me wrong, if i was a guy i'd bang her just cos she's Paris Hilton, and that could later be turned into a pick up line :O

bawahahaha

i can just imagin mike goin upto a chick

"last wk was pamela lee.. last night was hilton.. tonight baby it can be you"

only to soon find out that chick he's crackin onto is that transexual that was in the bigbrother house the other year

:)

mike - "no, but you can have his business card

anna - "oh thanks :) "

*mike beats her with bat round the head* now dont forget it :O

If u don't want me to forget things, i advise you to not hit my head... instead go for the traditional knee capping....

hey i'm old fashioned ok?!

:bunny:

lmfao i got a reply from HSV on boost :)

Next time you feel like stirring shit, is the next time you will not be welcome at this site anymore. Understand? I hope for your sake you do.

HSV

BoostCruising Moderating Team

ahahahahahaha

i dont think he likes me, he always closes my threads on there

bawahahaha

i can just imagin mike goin upto a chick

"last wk was pamela lee.. last night was hilton.. tonight baby it can be you"

only to soon find out that chick he's crackin onto is that transexual that was in the bigbrother house the other year

:)

BAHAHAHA What was it called? M something....

bawahahaha

i can just imagin mike goin upto a chick

"last wk was pamela lee.. last night was hilton.. tonight baby it can be you"

only to soon find out that chick he's crackin onto is that transexual that was in the bigbrother house the other year

:)

yeah good times good times.........*momentary silence*...........SHIT!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • OK, Step 3, if you need to remove the valve body, either to replace it, the TCM, or to do a more complete drain.  First, you need to disconnect the TCM input wires, they are about half way up the transmission on the drivers side. One plug and the wires are out of the way, but there is also a spring clip that stops the socket from sliding back into the transmission. On my car the spring clip was easy to get, but the socket was really stuck in the o-ring of the transmission housing and took some.....persuasion. You can see both the plug to remove (first) and the spring clip (second) in this pic Incidentally, right next to the plug, you can see where the casting has allowance for a dispstick/filler which Nissan decided not to provide. there is a cap held on with a 6mm head bolt that you can remove to overfill it (AMS recommend a 1.5l overfill). Final step before the big mess, remove the speed sensor that is clipped to the valve body at the rear of the box.  Then removal of the Valve Body. For this the USDM Q50 workshop manual has a critical diagram: There are a billion bolts visible. Almost all of them do not need to be removed, just the 14 shown on the diagram. Even so, I both removed one extra, and didn't check which length bolt came from which location (more on that later....). Again it is worth undoing the 4 corners first, but leaving them a couple of turns in to hold the unit up....gravity is not your friend here and trans oil will be going everywhere. Once the corners are loose but still in remove all the other 10 bolts, then hold the valve body up with 1 hand while removing the final 4. Then, everything just comes free easily, or like in my case you start swearing because that plug is stuck in the casing. Done, the valve body and TCM are out
    • OK, so if you are either going for the bigger fluid change or are changing the valve body which includes the Transmission Control Module (TCM), first you should have both a new gasket 31397-1XJ0A and a torque wrench that can work down to 8Nm (very low, probably a 1/4 drive one). You can probably get by without either, but I really didn't want to pull it all apart together due to a leak. First, you now need that big oil pan. The transmission pan is 450 long x 350 wide, and it will probably leak on all sides, so get ready for a mess. There are 24x 6mm headed bolts holding the pan on. I undid the 2 rear corners, then screwed those bolts back in a couple of turns to let the pan go low at that end, then removed all the middle bolts on each side. Then, undo the front corner bolts slowly while holding the pan up, and 80% of the fluid will head out the rear. From there, remove the remaining bolts and the pan is off. You can see it is still dripping oil absolutely everywhere...it dripped all night.... I got another couple of litres when I removed the pan, and then another few when I removed the valve body - all up another 4l on top of the 3 already dropped in step 1.
    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
×
×
  • Create New...