Jump to content
SAU Community

Recommended Posts

Grrrr stupid temp here won't shut up!

anna, today is your chance to get back at her! crap on her desk and piss in her drawer! do it!

if you dont know what it is you dont deserve them..... :laugh:

meh, not worth having then :laugh:

although i am still curious :)

this is the route we are going on sunday:

I suggest cut across town, up payneham rd, montecute rd, corkscrew rd, right up gorge rd and back down via north east road back to town and then the airport.

anyone know adelaide at all?

What does the job at your work entail, mikey, and is it full time / part time / casual?

ummm, customer service mostly. obviously there are things to be cleaned and someone has to go across the road to get my lunch. full time on a rotating roster

like i give a Mcshit..... dont make me kick you in the McNuggets :laugh:

lmao gold lee, just gold

ummm, customer service mostly. obviously there are things to be cleaned and someone has to go across the road to get my lunch. full time on a rotating roster

lmao gold lee, just gold

hrmmm... I think the WP jobs sound more enticing.

my favourite anime =

ninja_scroll.jpg

onesheet.jpg

mmmm, ninja scroll, such classic anime.

i just ordered $200 worth today. also noticed fullmetal alchemist movie and Fullmetal panic: the second raid come out on thursday! :laugh: i cant wait.

mmmm, ninja scroll, such classic anime.

i just ordered $200 worth today. also noticed fullmetal alchemist movie and Fullmetal panic: the second raid come out on thursday! :laugh: i cant wait.

I really like the Ninja Scroll movie... Have you seen a show called Wolf's Rain?

wolfsrain.jpg

I really like the Ninja Scroll movie... Have you seen a show called Wolf's Rain?

wolfsrain.jpg

no, i had a look at it a while ago, but had no more money from a big anime spree :laugh: $900 in one day, no kidding. i'm well and truly addicted.

have you seen the series for Ninja Scroll?

Ninja scroll Hai fiiiive

Go the guy with the wasps living in his back!

yeah he's effing gross...

I still think the freakiest guy is the one with the flame in his chest and is see through that rapes that chick... he's so creepy!!

And the chick that sewed all extra arms on her and she's like a crazy corpse spider!!!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Well, yes, every CU on the bus is available via the Consult port, but whether the scanner you are using is capable of talking to the TCU, the ABS/TCS modules, etc etc, is what is at question here. Many of them are only for engine codes. So, if you have one of those, you won't know if the ABS is having a bitch.
    • That's now. R chassis Skylines come from a time when the tolerance in the ADRs was a bit more....slack. My car, on 235/35-17, which is damn near the exact same size as the original 205/55-16, is pretty much bang on correct indicated speed across the whole legal range. That's demonstrated with constant speed run over 5km, and GPS speed. It's just the luck of the draw. My particular speedo head has to be the thing that is "calibrated" that way, because everything else (the diff ratio, the gearbox and the speedo drive**) are all same same as most other Skylines. **OK, so the speedo drive is a Navara unit to drive the R32's cable, not the electronic unit than an R33/4 would normally have with teh same gear on it. Otherwise, I applaud your OCD tendencies, and I would do the same if I needed to.
    • Not too sure, I believe the Nissan consult port does everything? Also just filled up the reservoir to full and the light is still on. The float seems to move up and down fine.
    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph on 255/40 17, so again conservative Google says manufacturers need to set the speedo from 4 to 10% slower than actual road speed.....for safety.....and compliance  After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
×
×
  • Create New...