Jump to content
SAU Community

Recommended Posts

Grrrr stupid temp here won't shut up!

anna, today is your chance to get back at her! crap on her desk and piss in her drawer! do it!

if you dont know what it is you dont deserve them..... :laugh:

meh, not worth having then :laugh:

although i am still curious :)

this is the route we are going on sunday:

I suggest cut across town, up payneham rd, montecute rd, corkscrew rd, right up gorge rd and back down via north east road back to town and then the airport.

anyone know adelaide at all?

What does the job at your work entail, mikey, and is it full time / part time / casual?

ummm, customer service mostly. obviously there are things to be cleaned and someone has to go across the road to get my lunch. full time on a rotating roster

like i give a Mcshit..... dont make me kick you in the McNuggets :laugh:

lmao gold lee, just gold

ummm, customer service mostly. obviously there are things to be cleaned and someone has to go across the road to get my lunch. full time on a rotating roster

lmao gold lee, just gold

hrmmm... I think the WP jobs sound more enticing.

my favourite anime =

ninja_scroll.jpg

onesheet.jpg

mmmm, ninja scroll, such classic anime.

i just ordered $200 worth today. also noticed fullmetal alchemist movie and Fullmetal panic: the second raid come out on thursday! :laugh: i cant wait.

mmmm, ninja scroll, such classic anime.

i just ordered $200 worth today. also noticed fullmetal alchemist movie and Fullmetal panic: the second raid come out on thursday! :laugh: i cant wait.

I really like the Ninja Scroll movie... Have you seen a show called Wolf's Rain?

wolfsrain.jpg

I really like the Ninja Scroll movie... Have you seen a show called Wolf's Rain?

wolfsrain.jpg

no, i had a look at it a while ago, but had no more money from a big anime spree :laugh: $900 in one day, no kidding. i'm well and truly addicted.

have you seen the series for Ninja Scroll?

Ninja scroll Hai fiiiive

Go the guy with the wasps living in his back!

yeah he's effing gross...

I still think the freakiest guy is the one with the flame in his chest and is see through that rapes that chick... he's so creepy!!

And the chick that sewed all extra arms on her and she's like a crazy corpse spider!!!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...