Jump to content
SAU Community

Recommended Posts

should i go tein or bilstein for suspension? cost about the same. Tein SS plus EDFC or Bilstein PSS9 fully adjustables.

cant decide?

DMS (drummond motorsport) dont be soft, u know you want them :laugh:

u could contact sydneykid to see if he can do u one of his susp. kits

DMS (drummond motorsport) dont be soft, u know you want them :laugh:

u could contact sydneykid to see if he can do u one of his susp. kits

how much would he charge? car already has bushes, braces and swaybars, just need better coilovers and front strut brace and swaybar

should i go tein or bilstein for suspension? cost about the same. Tein SS plus EDFC or Bilstein PSS9 fully adjustables.

cant decide?

Tien is the sony explode of suspension, who ever markets them is far better at thier job than the people who make them :laugh:

Bilstien all day every day

only about $4000 :laugh:

considering i was spending bout 3k anyway, i would spend the extra 1k if they were worth it. i'm building this for race applications remember

oh and what about adjustable arms?

later, not yet. camber is good enough atm. bout 1.5-2 degrees.

considering i was spending bout 3k anyway, i would spend the extra 1k if they were worth it. i'm building this for race applications remember

later, not yet. camber is good enough atm. bout 1.5-2 degrees.

haha that 4k i was referring to the DMS springs & shocks

P.S how u going to get that much camber without adjustable arms? :laugh:

Tien is the sony explode of suspension, who ever markets them is far better at thier job than the people who make them :O

Bilstien all day every day

just like HKS :laugh:

haha jokes jokes, HKS make some sick gear :laugh:

haha that 4k i was referring to the DMS springs & shocks

P.S how u going to get that much camber without adjustable arms? :laugh:

they come like that. its prob closer to 1. for springs and shocks, 4k isnt too bad, for what i want anyway.

OMG ahahha I work in Brisbane.

Who wants to f**k... I mean have mega gay lunch 2gether hhahah

:nuke: i just ate, so your off the menu thanks

:O

just like HKS :O

haha jokes jokes, HKS make some sick gear :laugh:

some sick gear. they are getting greedy and trying to dominate the entire market.

they come like that. its prob closer to 1. for springs and shocks, 4k isnt too bad, for what i want anyway.

:laugh: i just ate, so your off the menu thanks

:laugh:

some sick gear. they are getting greedy and trying to dominate the entire market.

i love their exhausts, its just soo high quality and u can see alot of thought has gone into the design (well the gear ive got that is lol)

if ur serious about it, heres the website www.dmshocks.com

i love their exhausts, its just soo high quality and u can see alot of thought has gone into the design (well the gear ive got that is lol)

if ur serious about it, heres the website www.dmshocks.com

nah, might go bilstein over them. the bilsteins have more tuneability.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
×
×
  • Create New...