Jump to content
SAU Community

Recommended Posts

I don't stay at houses of runner-awayers :thumbsup: Sammeh has his own place now i'll make him let me sleep on his couch :laugh:

JK I still wub you heaps, just sad you're leaving me :(

at this stage it's for 6 months so it's not heaps long if I decide to come back after that :(

PLUS i'll be up here every 2nd weekend to see my favourite boysy :yes:

:yes:

:thumbsup:

KITAS!!!!!!!!!!!!!! :(

good, caus if u dont ill go all anti-emo and start cutting other people :(

Hoorah! Perhaps we'll see some emos - last time I was at the Vic I took pics of 2 emo boys cuddling each other :laugh:

KITAS!!!!!!!!!!!!!! :yes:

Hoorah! Perhaps we'll see some emos - last time I was at the Vic I took pics of 2 emo boys cuddling each other :laugh:

rofl's...its pretty much a garuanteed to see emo's in teh city though :thumbsup:

another person....hello other person

Hello :(

don't worry keets there's always room for you too!! :(

Cept you hafta stay in my bed... :(

and sniff this clorophorm

*giggles*

hahahaha

Anna: "Hey Keets does this smell like clorophorn?"

*Nikita sniffs rag*

*Annas has her way*

I can't wait for our sleepovers *giggles*

kitas -----------------> :thumbsup:

:laugh:

Aww that's luurve right there babeh :yes:

Hello :(

hahahaha

Anna: "Hey Keets does this smell like clorophorn?"

*Nikita sniffs rag*

*Annas has her way*

I can't wait for our sleepovers *giggles*

Aww that's luurve right there babeh :thumbsup:

u 2 are lesbians, i swear it!

damn straight :laugh::yes:

read it again bitch... quick edit FTW!!!

you suck, alot

hahahaha, i saw you, I was with Josh....some chick was trying to get it on with us hahaha.

oooooh I see. I think i'm going to get nude tonight and see where I can go without getting in trouble :laugh:

Im gonna make strippers molest Shane

yessssssssssssss :sorcerer:

Me too? I like being molested by nude chicks :thumbsup:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...