Jump to content
SAU Community

Recommended Posts

nothing yet, he is still mucking around with johns clutch.

rofl, i know an easy fix

throw that shithouse clutch in the bin, and put a decent one in there :)

Shroom, stop browsing the forum and get to assembling that bling thing. Shane will beat you to it at this rate.

rofl, i highly doubt it :)

then again, i havent had the urge to modify yet, so i dont know how long it takes

my advie, dont go custom :laugh:

lol you are a tool bag.....you did know that the failure isn't in the clutch at all right??

i just finished speaking to dan about it and they reckon marc jacobsens clutch (which is the same clutch) has never had to have the hubs replaced, and this one needs it after how long.

Ps been gay long??

only since i met you :)

i just finished speaking to dan about it and they reckon marc jacobsens clutch (which is the same clutch) has never had to have the hubs replaced, and this one needs it after how long.

what an awesome clutch it must be! damn, i'm going to get one for myself now! :laugh:

lol you are a tool bag.....you did know that the failure isn't in the clutch at all right??

not what donkey man above says :laugh:

P.S my mate's heavy duty NPC in his gtr wont hold a 6000rpm launch on street tyres!

only since i met you :)

what an awesome clutch it must be! damn, i'm going to get one for myself now! :laugh:

Would you like to hear the story about the Jim Berry Clutch that wrote off a car???

Nah it wouldn't interest you anyway you have selective hearing :)

Would you like to hear the story about the Jim Berry Clutch that wrote off a car???

Nah it wouldn't interest you anyway you have selective hearing :laugh:

thats cause his heads so far up jim berry's arse that he cant hear anything else

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...