Jump to content
SAU Community

Recommended Posts

i see your point, but when ever i have been looking at parts they always seem more expensive...and how much boost can you run on stock sr engine...i have heard of people running more the 1 bar on stock rb's. not saying that there is much different, and like always i am not sayin one is better then the other.

an sr is a new engine, better technology, but like an rb they have there down falls.

who you callin sexy.....whore man

Been looking at lots of parts lately and the SR ones are usually cheaper

Marki I ran 18psi for a year on my stock RB25 and the headgasket did not blow, 17 to 18psi is considered the limit

I ran 23psi on an unopened RB25. Buggered if I know how but it refused to die, I had another bottom end ready to go but I ended up not needing it. Certainly not something I'd recommend trying though :P I just did it because I considered the stock bottom end to be expendable lol

im actually soo use to him not picking up, i just leave messages, i get a supprise when he actually does pick up :P

really, ive never had dan miss a call from me.

i must be the favourite

Bishes *tips hat*

YEO!!!!

lol and pg2me

smich as

Been looking at lots of parts lately and the SR ones are usually cheaper

Marki I ran 18psi for a year on my stock RB25 and the headgasket did not blow, 17 to 18psi is considered the limit

times change i guess...this was a few years ago when i was.

hey Bunta i need advice on a 25 build.!!!

i see your point, but when ever i have been looking at parts they always seem more expensive...and how much boost can you run on stock sr engine...i have heard of people running more the 1 bar on stock rb's. not saying that there is much different, and like always i am not sayin one is better then the other.

an sr is a new engine, better technology, but like an rb they have there down falls.

who you callin sexy.....whore man

yeah but they dont recommend it..

ohh ive been waiting for this ready.. 18-24psi on the SR safely.. :P with standard head gasket... *runs from dan to avoid abusive language from listening to sheep on ns.com*

Bishes *tips hat*

hiya marc..

really, ive never had dan miss a call from me.

i must be the favourite

it didnt ring out..

im just saying in general.. the prices are cheaper for the unliked 4 bangers.. as in coilpanks cheaper GKtech have full turbo back exhaust for 400 new.. turbos are cheaper most of the time for say T2 flanges. pfcs are cheaper.. only cause they are more common on the SR u can pick up a redtop SR pfc for 4-600 and here a R33 gtst one goes for 1250 in a matter of hours.

also clutches and boxes cheaper.. diffs cheaper. yes they are weaker but less weight play a part in the design..

im just saying in general.. the prices are cheaper for the unliked 4 bangers.. as in coilpanks cheaper GKtech have full turbo back exhaust for 400 new.. turbos are cheaper most of the time for say T2 flanges. pfcs are cheaper.. only cause they are more common on the SR u can pick up a redtop SR pfc for 4-600 and here a R33 gtst one goes for 1250 in a matter of hours.

also clutches and boxes cheaper.. diffs cheaper. yes they are weaker but less weight play a part in the design..

b b b but they still sounds shit.....

:P:):rofl:

mine sounds like VTEC up high.. ahaha stupid exhaust..

hahahahahaha

I cant believe what i just read, there is something seriously wrong with you mark please consult a physician urgently

Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome

Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome

Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome

Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome

bahahaha

thats the funniest thing uve said all week noel...

ok i admit black adn chrom look good but still prefer black face chrome lip.. not full face chrome.. and admit a hid kit would look horn..

hmm.. i might buy a cheapo shit box skyrine 32 and put a F20C into it... :P

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Why are people so insistent on making dirty water?!
    • Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
×
×
  • Create New...