Jump to content
SAU Community

Recommended Posts

f**ks me, Pajero should be gone this week, was meant to be gone last week. I duno what I will buy or can buy. I don't have cash money thats easy to get too right now.

Plus in recent light re: ACA, I really shouldn't be flaunting.. all will make sense come airing. As it will really bite me hard. Been getting dicked around with PEET, I can't be assed waiting for their license re issue, so searching for something else unless we can get this license worked out very soon

Help us get the R33 sorted and you ave a car ready to go Josh! We don't use it ever

having a whinge how crap CAMs regs are, doing up z cage in CAD, other than that fark all :P

watcha doin?

lol yeah cams is quite ghey.

i am doing "work".....well should be...actually i am going for lunch...

peace out...bbl

wha choo up to homs?

hey lizzzzehhhhh s'happening girl?

hey not much

ok guys.. i have a drama.

I have been offered a job, I haven't received the paperwork yet.... they required me to go for a medical before they'd issue paperwork... medical was all fine... but they went into my history to do with workers comp claims.. and i had one, an open claim... my injury doesn't interfer with work anymore.

I'm waiting to hear back, but the suspense is killing me.

They can't not offer me a job on that basis can they?

well... they had a box on the form where you had to disclose it... so I did....they are looking into it further.. meaning asking ME about it.... I haven't authorised them to investigate further.

but the thing is... they can't not offer me a job on the basis i've had a claim.. RIGHT?

it's not affecting my work!!!

RIGHT?

I could have easily just not ticked the box and no one would have asked questions

hey not much

ok guys.. i have a drama.

I have been offered a job, I haven't received the paperwork yet.... they required me to go for a medical before they'd issue paperwork... medical was all fine... but they went into my history to do with workers comp claims.. and i had one, an open claim... my injury doesn't interfer with work anymore.

I'm waiting to hear back, but the suspense is killing me.

They can't not offer me a job on that basis can they?

technically they cant not offer you the job for that reason no.

but they can just not offer you the job because you didnt fit the requirements.

lets hope its neither and liz gets the job.

be positive and no ugly thoughts and i am sure it'll be peachy.

well... they had a box on the form where you had to disclose it... so I did....they are looking into it further.. meaning asking ME about it.... I haven't authorised them to investigate further.

but the thing is... they can't not offer me a job on the basis i've had a claim.. RIGHT?

it's not affecting my work!!!

RIGHT?

I could have easily just not ticked the box and no one would have asked questions

thats good its best not to hide anything, cause when they do find out, and they would then all shit breaks loose.

technically they cant not offer you the job for that reason no.

but they can just not offer you the job because you didnt fit the requirements.

lets hope its neither and liz gets the job.

be positive and no ugly thoughts and i am sure it'll be peachy.

yeah, i don't think they can make up a reason... they knocked on my door and not the other way around

thats good its best not to hide anything, cause when they do find out, and they would then all shit breaks loose.

I'm still scared! :P

hugs?

Help us get the R33 sorted and you ave a car ready to go Josh! We don't use it ever

I can pick up that strut anytime, as a fill in, until the others come through. I'll just sell it on ebay afterwards or dad will put it through on tax so I wouldnt worry too much about the price.

We could get it in on the weekend, then get a mate to fit tires up here as I cant get the 18's down to your place :P

Btw, my paper work that we filled out will be comming to your house now :D

*hugs liz*

lotsa hugs for Liz, to make her feel better. :P

awwww thanks!

How hot are these rims Liz??

they are nearly as hot as you.

nearly!!!!

His name is Shane, lives in Ippy somewhere

lol ippy.. what a tool.

I'm getting a cold, kids. How does one get a cold comming into summer? My back hurts, my head hurts, i cant breath, my eyes feel like they are going to pop out of my head.

I think Noel gave me aids.

change in temps.. i've ot one too.

ps. hug me?

lol ippy.. what a tool.

change in temps.. i've ot one too.

ps. hug me?

Yeha I reckon his got a bit of koorey blue blood in him too, dodgy c**t wanting ippy land rights.

Change in temps could be it, im pretty un fit so i could really catch anything lol

always hugs

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
×
×
  • Create New...