Jump to content
SAU Community

Recommended Posts

not too old.. atleast its a late one.

i had same prob with the GTR bushes wearing and electrics..

with the 180sx things are cheaper and bushes are in better condition. cause its newer but i dislike the elctrics in it. have speaker drop outs and a/m gauges dropping out.

my guess its dodgy earths.

i have no problems at all with that sort of thing its all been replaced anyway

i will clear it up...the car has NO problems at all, just i personally do not like the car and feel for the money I could have done better actually a lot better, if some one else bought it they could have it the way i want for probably 2k, its just i dont care enough to screw around with it again

uve got genuine gaskets and intake gaskets... wtf..? and u dnt need a genuine gtr key

thats what happens when u bust them :D

also no gtr is complete without the real key! :sorcerer:

but u have genuine gasket kit which include intake mani gasket. and new waterpump should come with a gasket too.

and u dnt need to paint covers and bay.. and nor do u need plates. just somethings u can wait out a bit

once again mark, quality of job. also why do painting later when everything is apart and stripepd now?

it doesnt say genuine gasket kit, i bought random ones from dan. when i was dummy fitting the motor i had the intake gaskets on, and they broke when i took the plenum off.

also water pumps dont use gaskets, they use gasket goop. u shoulda known that already. its oil pumps that use gaskets.

once again mark, quality of job. also why do painting later when everything is apart and stripepd now?

it doesnt say genuine gasket kit, i bought random ones from dan. when i was dummy fitting the motor i had the intake gaskets on, and they broke when i took the plenum off.

also water pumps dont use gaskets, they use gasket goop. u shoulda known that already. its oil pumps that use gaskets.

the last waterpump i fitted used gasket and silicone.. ohhh snap.. huh..?? i basted the gasket.. on ur list it says waterpump gasket but u should knw that.. u made the list.

the last waterpump i fitted used gasket and silicone.. ohhh snap.. huh..?? i basted the gasket.. on ur list it says waterpump gasket but u should knw that.. u made the list.

it says

water pump & inlet manifold gasket
which means water pump (u know the big metal thigny majingy) and an intake gasket, ya farken douchbag :D
it says which means water pump (u know the big metal thigny majingy) and an intake gasket, ya farken douchbag :D

haha

why would u group water pump and inlet gasket together. why not say

a. water pump

b. inlet manifold

ppl are gonna read it and think u want a waterpump gasket.

haha

why would u group water pump and inlet gasket together. why not say

a. water pump

b. inlet manifold

ppl are gonna read it and think u want a waterpump gasket.

caus i bought them at the same time and i know what it meant :D

plus i only had a total price, not individual prices

no they wont.

did u get to see it before i removed the link? i can pm it to you if u want a squizz...i only removed it caus theres some prices in there im not suppose to let anyone else see/know about :D

did u get to see it before i removed the link? i can pm it to you if u want a squizz...i only removed it caus theres some prices in there im not suppose to let anyone else see/know about :D

nup didnt see it... you better PM me lol

no they wont.

ur gay

they are all the same anyway.. good ol nissan for doing that.

incorrect. rb20 and 25 differentiate wiith bolt placement

did u get to see it before i removed the link? i can pm it to you if u want a squizz...i only removed it caus theres some prices in there im not suppose to let anyone else see/know about :D

i can post the imageshack link lol... but im not that much of a dick

hmm well jspec sucked today

looking for a chaser i hope..

go see iron chef imports.. he specialises in chaser

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...