Jump to content
SAU Community

Recommended Posts

fair enough Zac.......Kathryn gets trashed all the meanwhile you do FnF powerskids out of yer street :nyaanyaa:

no i need a front wheel drive for that hahaha :P

Poor form on your behalf. That's the whole point of having a wussa. She drives your drunken arse around haha. Geez no real shock as to why I have been single for so long haha

no its being a gentleman allowing your lady to have a drink while you chauffeur her around, that way when the time comes she can repay me :P

yeah but where the hell is nick.... for the infamous qld whore he isnt whoring much.... probably doing spreadsheets... or juggling Worcestershirere bottles again

Hehe :P

It's kathryn... But just finished work. Wbu??

That's what I ment lol, and not alot just finished work and walked home cause on of my cars is broken and the other is getting go fast bits put into it.

Half trying to find a party to go to tonight but at the same time I've been up since 5 so I could just go to sleep... So it's win win

That's what I ment lol, and not alot just finished work and walked home cause on of my cars is broken and the other is getting go fast bits put into it.

Half trying to find a party to go to tonight but at the same time I've been up since 5 so I could just go to sleep... So it's win win

go to the party and sleep in the corner?

every party has to have that person.

Edited by cowdy

Mmm coronas :)

Dude she likes coronas and rum and skylines and fast and furious!? :woot: *cough* marry her *cough*

*You can try and beat up Nick or even push him off a chair and yell at him to get the fu*k out of your house and the bastard still won't leave.

*As for drag day, the vspec has been and done its one drag day and will not be seeing the strip

Time for beer now!!!!!!

1st point: this actually happened, that was "let's drink a whole bottle of scotch night", I believe I also stood on your sore toe and tacked you into a bin.... Isn't it a good thing you love me :wub:

2nd point: I thought you were getting a lift with me in The Abomination?

sleep is nice but I think that beer / scotch is on the cards and probably a good movie

I just picked up a bottle of cc... I duno why, meh it'll come in handy I'm sure, what's crackin me ants

Bloody Nick - get yer sh!t right sonny.......don't worry Kathryn no doubt Nick is tryin to work and whore at the same time but I think he whores more

It's probley an even split between work and whoreing... Buuuuut. I'm the boss at one job what are they gonna do complain :P

you must look at some seedy parts of the internet to find that shiz...

speaking of youtube look at this video.... most farked up thing i have seen

Edited by cowdy

Dude she likes coronas and rum and skylines and fast and furious!? :woot: *cough* marry her *cough*

1st point: this actually happened, that was "let's drink a whole bottle of scotch night", I believe I also stood on your sore toe and tacked you into a bin.... Isn't it a good thing you love me :wub:

2nd point: I thought you were getting a lift with me in The Abomination?

I'll marry her if he doesn't. I have all the F&F movies, plenty of coronas in stock a 32 GTR Vspec in the shed and over 100 model cars of skylines...... Ladies contain your orgasam's

Was it my birthday (which was the drink the whole bottle of scotch night) or another time? Has been a few and all blurred into one haha. I do remember you laughing at my fridge was the first ever TSO christmas party (which will be on again this year)

Unsure at the moment dude. Am tempted to get the Vspec out for a decent drive as hasn't done one since the night we went karting

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers) Replacement of the Valve body (if you removed it) is the "reverse of assembly". Thread the electrical socket back up through the trans case, hold the valve body up and put in the bolts you removed, with the correct lengths in the correct locations Torque for the bolts in 8Nm only so I hope you have that torque wrench handy (it feels really loose). Plug the output speed sensor back in and clip the wiring into the 2 clips, replace the spring clip on the TCM socket and plug it back into the car loom. For the pan, the workshop manual states the following order: Again, the torque is 8Nm only.
×
×
  • Create New...