Jump to content
SAU Community

Recommended Posts

Mr Ants, here is a well interesting article on the problem I experience and had discussions with you about. His before CAS signal plot looks just like mine! http://www.skylinesaustralia.com/forums/topic/384932-new-rb-parts-with-results/

Also may have solved my computer issue for a lot cheaper than I thought so it may get done earlier now!

Mr Ants, here is a well interesting article on the problem I experience and had discussions with you about. His before CAS signal plot looks just like mine! http://www.skylinesaustralia.com/forums/topic/384932-new-rb-parts-with-results/

Also may have solved my computer issue for a lot cheaper than I thought so it may get done earlier now!

that's positive news Bunts

not much except that he endorses it and is well experienced in tuning it.

Cool I thought as much, he recommends Wolf but only because he can personally get them the cheapest or somthing along those lines, he told me that any of the top teir ECUs are fine by him

that's positive news Bunts

In regard to that article I dont actually expect you to have the same issues because all your timing gear is newer, but it will be a really interesting tune to watch in that regard

Ya it is, Just tracking down info on the ECU now but it seems all good.

Edited by Bunta

Yeah, also I know Paullie runs a Ross crank trigger kit. He also makes 470rwkw with -5s so I can understand why he has it.

Yeah that will be the main difference, I just cant justify paying the money for the Ross kit, and Dan recently had issues with several Ross balancer's apparently the cranks were full of tiny little cracks from a dodgy balancer.

Hay guys just stop in to say hello =)

Hello

Cool I thought as much, he recommends Wolf but only because he can personally get them the cheapest or somthing along those lines, he told me that any of the top teir ECUs are fine by him

In regard to that article I dont actually expect you to have the same issues because all your timing gear is newer, but it will be a really interesting tune to watch in that regard

Ya it is, Just tracking down info on the ECU now but it seems all good.

in the event those jitters crock up I will install that trigger disc. Hopefully that will help.
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...