Jump to content
SAU Community

Recommended Posts

I am sure that can be arranged, come to my place, I have tap king and head start glasses, its like a pub only cheaper and less surrounded by douchery, I say less surrounded because I will be there, so there is still some douchery.

If I'm there does that effect that douchery balance?

well maybe next time Nick...............next time

Won't be next time next time unless nick save some dorars and gets some work done. Martin went 13.6~ at the strip I went 13.71... There's nothing in it ATM.

Yer yer yer ... Look out Marty, there's a special place on my "to be chopped" list for u :devil:

I seriously reckon that you can chop the Flying Wedge. Just drive past it whilst it's parked. You stand no chance hombre. No chance. That dude can steeer!

he will wear a Michelangelo T-shirt

That would be acceptable

Umm, there is potential there for it yes....

That would not

Have to keep the ratbags out. Shall I tell Benno that he isn't allowed or will you?

He will find a way in some how, its what shady characters do

I seriously reckon that you can chop the Flying Wedge. Just drive past it whilst it's parked. You stand no chance hombre. No chance. That dude can steeer!

I refuse to acknowledge the difference between "dude can steer" and "dude is bat shit mental" when it comes to mike and mcflys track habits

Won't be next time next time unless nick save some dorars and gets some work done. Martin went 13.6~ at the strip I went 13.71... There's nothing in it ATM.

I went 13.8, I get to be in this race too

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...