Jump to content
SAU Community

Recommended Posts

Hi All

As most of you know, i had a bad front on and rid off my car, i final finished repairing it and when you start it up for the first 30sec - 1min there is a tapping sound, when the car gets warm the tapping goes away? any ideas? i was thinking it was the fan at first as the radiator was wrapped around it, but im not sure anymore?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/119421-tapping-from-engine-until-warm/
Share on other sites

how long has it been since the engine has been running ?

Did you change the oil ? If so did you go to a different oil to what you normally use ??

If you have not had the engine running for a while the lifters are probly playing up. Get some lifta free from your auto parts shop and run that in with a new oil change and filter. Should fix the problem.

spoke to mechanic bout this and yeah exactly what the guys have already said in here. Use a heavier oil, it goes away after a while because the oil level has to rise and lubircate parts something like this. If its still doing it while its warm and driving around and gets louder while accelerating then yeh thats a different story I believe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • But seriously, can we ask for the results of the "tip a bottle of metho into a nearly empty tank" experiment?
    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
    • Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
×
×
  • Create New...