Complete Dismantled And Cleaned Rb30 All Parts Avalible

[the big JC]

Iv got a RB30 that i brought with the intention to put it into my R30 skyline but ive now lost interest in that idear and decided to turbo the motor that's in there.

It came out of a VL and surprisingly the head was not cracked or warped.

I will post most items at the buyers expense and organisation Ive got pics of everything so don't hesitate to ask for a pic if your (genuinely interested)

Major items (all prices negotiable)

.distributor with performance 8 and 9mm silicone leads $60 (sold)

.good clean set of N/A pistons and gudgeon pins do have rings but i don't know if there useable so there free with the pistons $100

.clean set of rods $80

.hand polished plenum in the usual places $40

.highly polished TB $30

.head in exeptional condition no cracks and not warped needs new studs and stem seals $130 (pic up prefered but i will post)

.series 2 block so its suitable to plumb a turbo ive pressure cleaned it and it's pretty much spotless needs a light hone and new welsh plugs i will include the crank and sump if you want the sumps got a fair dent in it but its probably fixable $130 (NO POSTAGE)

.AC compressor i think it's aftermarket it's a Sanden TR-70 turbo rotary, it's spottlessly clean $50

.auto ecu $20

.trip computer$30

.x2 cams and gears one better than the other $40 for the better one and $30 for the other one

.one set of lifters and rockers spottlessly clean they look like new $60 for the lifters and $40 for the rockers these come off of another head that i brought that was cracked i have the ones off this motor but there filthy and im not cleaning them and there missing one lifter cos i dropped it and it broke they would be ok after a good clean make an offer

.half polished fuel rail never got arround to finishing it $20

.flywheel $30

.x2 set of clean valves, springs, and collets $30 each set

.mint exhaust manifold with custom heat shield alot thicker that the stock ones and painted with red heat proof paint $50

.x1 set of freshly painted timing covers red with black stripes they look sick $30

.mint water pump and oil pump $40 each

.full set of head bolts $50 for the set

I think thats all the major items but its a complete motor so there is still heaps of good clean stuff left just ask

if yor interested in the block or head just call me Josh on 0431200311 after 6pm on week days and any time on the weekend

http://www.pixpond.com/1/wcm3uq.jpg (block 1)

http://www.pixpond.com/1/wcm3uq1.jpg (block 2)

http://www.pixpond.com/1/wcm42b.jpg (Head 1)

http://www.pixpond.com/1/wcm42b67.jpg (head 2)

http://www.pixpond.com/1/bn9hc.jpg (plenum 1)

http://www.pixpond.com/1/bn9hc88.jpg (plenum 2)

http://www.pixpond.com/1/38gmld.jpg (distributor)

http://www.pixpond.com/1/38gmld4.jpg (AC compressor, altinator, water and oil pumps)

http://www.pixpond.com/1/38gmol.jpg (cams, computors, lifters, and rockers)

http://www.pixpond.com/1/38gmol18.jpg (exhaust manifold and heatshield)

http://www.pixpond.com/1/38gmr5.jpg (water and oil pumps)

http://www.pixpond.com/1/cu7by.jpg (Pistons and rods)

[V8skylineMAN]

you do realise that you can pick up a complete rb30 for under $100, ive even managed to pick one up for a caton, and yes it was a series two. anyway, good luck with your sale.

[the big JC]

for $100 you can buy a f!#ked motor with a cracked head that would probbaly take alot of time to clean and check/test and all my prices are negotiable i realy didn't take the time to see what the going rates for all this stuff was so i just put what prices i thourght where reasonable

[the big JC]

(bump) screw the prices just make an offer i need this shit gone i really dont care what i get for it now