Jump to content
SAU Community

Recommended Posts

Bought these 2 weeks ago, but selling them due to a change of plans.

The camshafts are brand new, still in the boxes and plastic. They are for the Series 2 RB25DET R33 Skylines or Stageas.

Part numbers for the cams are:

143050

IN 1415 256085

EX 1426 256085

They are 256 degrees duration and retain the standard 8.5mm lift.

For more information on Poncams, the Tomei website

http://www.tomei-p.co.jp/_2003web-catalogu...shaft_rset.html

These cams are designed to be a DIRECT replacement to the standard cams, retaining the stock lifters.

I am asking $780 + delivery. These are brand new guys!

Edited by SPOOLN
Because thats what I was told when I bought them. If you know different could you please tell us SK.

The inlet camshaft part numbers are the same for S1 and S2, but the exhaust camshaft numbers are different. This would indicate it may well be a difference between the CAS drives. The cylinder head castings, buckets, followers, valves, collets etc are definitely the same, so it can’t be anything associated with that.

So the question is, are the S1 and S2 CAS’s different?

Then is S1.5 the same as S1 or S2?

:( cheers :woot:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
×
×
  • Create New...