Jump to content
SAU Community

Recommended Posts

As the topic suggests

Nismo LMGT2's - Lightweight forged wheels.

18x9.5 +14

Yokohama Tyres 245/40 (2 Good - 2 not so good)

Rims are in excellent condition.

SOLD

Can ship interstate.

email [email protected] or PM

post-24243-1148956322.jpgpost-24243-1148956341.jpgpost-24243-1148956360.jpg

Edited by Antimatter
Link to comment
https://www.sau.com.au/forums/topic/120112-nismo-rims-for-gtr-lmgt2s-18-x-95/
Share on other sites

Please PM me if you need any futher info. I am considering listing these on EBAY - But first dibs goes to you guys. Thanks!

Edited by Antimatter

How bad are the tyres fitted to the wheels? You say 2 are good and 2 are not so good. Are they legal? What type of Yokohama's are they? Current ones or would i have to buy another type?

Also, how much to send to Sydney?

PM me with the info mate...

G'day again

Two tyres would be legal (heaps of tread left) the other two are bald on the inside ( too much negative camber :dry: ). Tyres ar Yokohama Advan "neovo" ( or something like that ??)

$66 to send to NSW

Cheers

Steve

How bad are the tyres fitted to the wheels? You say 2 are good and 2 are not so good. Are they legal? What type of Yokohama's are they? Current ones or would i have to buy another type?

Also, how much to send to Sydney?

PM me with the info mate...

Edited by Antimatter

Any takers befor I list them on ebay?

(these wheels were over 5k new without tyres and are in top nic...)

Tyres come free with the wheels :thumbsup:
Edited by Antimatter

Gday steve,

Have you still got these wheels available.

I have an interseted party who is based in melbounre and willing to purchase the wheels immediately.

The person interseted name is John kennedy and can be contacted on one of the following number.

0433 238 174

We would appreciate if you could contact us either way to let us know whether they are available.

Regards

Brad

Hi Brad

I sent an email to Brigid a few minute ago about these.

Sorry for the delay in reply

Cheers

Steve

Gday steve,

Have you still got these wheels available.

I have an interseted party who is based in melbounre and willing to purchase the wheels immediately.

The person interseted name is John kennedy and can be contacted on one of the following number.

0433 238 174

We would appreciate if you could contact us either way to let us know whether they are available.

Regards

Brad

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...