Jump to content
SAU Community

Recommended Posts

sorry for hi-jacking the thread but do you guys normally drive with overdrive on or off?

and whats the difference?

i know on highway if your crusing at 100/110 it will engage the overdrive gear, but just generally driving around town going 60 - 70 do you have overdrive on?

Ive a r33 with auto for nearly 5 years now, no problems at all, and im not easy on it. I control manually when the shifts happen, but every now and then ill let the computer do it. I am also running an aftermarket ECU (motec M48) and have no problems with line pressures or shift points. It is a FOUR speed box (o/drive being the 4th gear), with a lock up torque converter. I NEVER have over drive switched on unless im travelling over 80k's. All the autochanging in and out at around the 70'k mark is not good on clutch packs.

yeah I use to drive with it on always because it revved lower, but after some research found that even though it rev's higher its not wasting any more petrol, and you use alot less throttle to pik-up

I turn O/D on when I'm hitting about 70kph

strange, because with the overdrive on VLs, I drive with it on (pwr button sticking out) since it doesnt really come into effect until you go over 70 anyway.

I only have it off if I'm going up hills or have a heavy load

Edited by b1ancardi

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...