Jump to content
SAU Community

Plz Help. Removing Turbo Timer For Inspection (pics)

Howie

By Howie,
in Engines & Forced Induction

 Share

Recommended Posts

Howie Grand Master

Howie

Posted
Posted

Hi Guys,

In order to reregister my car in SA i have to remove the turbo timer in it's entirety.

So can you tell me if i'm on the right track. It's not my car yet, so I don't want to do something that would cause the car not to start anymore.

Do I just disconnect the looms indicated in orange below?

How about the vacuum tube indicated in red? Does it need to be plugged up after it's been disconnected?

removing_tt.jpg

Thanks, for all your help!

Cheers

Quinny Rising Star

Quinny

Posted
Posted

What is their problem with turbo timers? You need to let a turbo car cool down for a couple of minutes, what difference does it make if the key is in the ignition when it is running or not?

I would like to see them get my turbo timer out. Mine is incorporated as part of the alarm system.

Howie Grand Master

Howie

Posted
  • Author
Posted

I know it's pretty silly ain't it, but I guess they have their reasons.

The RTA inspector told me, NO BOV's that vent to atmo, NO boost controllers, NO turbo timers. They're really cracking down on that right now in SA.

So can anyone tell me if what I suggested above would work?

mad082 Grand Master

mad082

Posted
Posted

it is illegal to be more than 2 meters from any car when it is parked if the engine is still running. so even if you drive an old shitter and forget yur wallet and park on the street while you run inside to get it, if the car is running you can get booked. kind of makes sense though. if the car is running and it somehow got knocked into gear it could end up parked in someones lounge room.

yeah just unplug the looms and tape them up somewhere out of the way with black electrical tape. and you will have to block the vacuum hose. just kink it then zip-tie it to itself to keep it kinked and again, tape it somewhere where it is very hard to see.

Tangles Grand Master

Tangles

Posted
Posted (edited)
If you can just hide it up under the steering bit, under the dash. Make sure its turned off tho haha, dont wanna turn the car off while at the inspection and have it stay on for 2 mins :P

Thats where mine was (and still is). I did exactly that - turned it off and it wasnt a problem. Its still off now, I think they are dangerous. But I dont mind it being wired up still......

If you are bringing a car into SA that has previously been registered interstate (like I did) you dont need to go to Regency, can go to Sturt Rd station on Tuesdays or Thursdays 9am-3pm, they check for engine / vin numbers etc. and all other bits in the engine bay.

Edited by Tangles
Fry_33 Proficient

Fry_33

Posted
Posted

Do as mad says. If the car doesn't start without the turbo timer though you'll have to find out which wires coming out of the turbo timer provide power to let you car start. Then you'll have connect that wire to an ignition wire going to the turbo timer.. or something like that. I would say that its part of the bigger plug, the smaller plug looks like it is for the handbrake cut out..

Good luck with it

mad082 Grand Master

mad082

Posted
Posted

i had mine disconnected and the car started so should be all good, but might be wired differently to mine. i actually have mine down in behind the kick panel on the trans tunnel cause the doubl sided tape holding in place keeps coming off so i just stuffed it in there till i get time to relocate it. just hope it doesn't cook it, but i don't drive it much and usually not for that long.

Howie Grand Master

Howie

Posted
  • Author
Posted (edited)

Thanks for all the input guys... much appreciated.

Tangles, I was asked if i lived 40km's from the CBD by TransportSA, that being the case i've been told that I have to goto regency rather than a police station. Think i also read that on the TSA website.

Mad082, yeah looking at the diagram you would think that's the case right? The TT just sends a kill signal back and it switches off?

Or if fry is correct, then one of the line's is working as a switch? which case I should just bridge it again once the TT is removed?

wiring_tt.jpg

edit: added image.

Edited by Howie
Howie Grand Master

Howie

Posted
  • Author
Posted
i know its a blitz. i think it is the DTT-X will sus it out for sure. i'd just try unplugging it and see what it does. leave the vacuum hooked up for now tho.

What's the diff between a DTT-X and a DTT? I know the FATT doesn't display boost and therefore doesn't have the vacuum.

I'll give it a go when the car arrives in ADL.

Btw, I've read somewhere that the battery should be disconnected when installing. I'm guessing that's not necessary here because there's not any splicing going on right? Or is it always better to be safe than sorry?

R32_Matt Rising Star

R32_Matt

Posted
Posted
QUOTE

Ahhhhh. Ain't it grand to live in QLD

yes, yes it is, but atmo BOV's are still illegal up here.

Haha. In the ACT ive had three cars inspected, all with atmo BOV's, intercoolers, exhausts etc

and all have passed first go.

It has been a while since the last time https://www.catalogueau.com/big-w/ was available.

Fry_33 Proficient

Fry_33

Posted
Posted

I just found this webpage.

http://www.240sx.org/links/installs/blitz/tt/index.htm

Assuming you have this same one then it looks like the whole turbo timer just taps into everything, ie no cutting and re-routing. Therefore you should be able to just unplug it and crimp and cable tie the vacc hose.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      "Cheap" bolt on turbo on RB25DET NEO

      By joshuaho96 · Posted

      GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • GTSBoy
      "Cheap" bolt on turbo on RB25DET NEO

      By GTSBoy · Posted

      I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • GTSBoy
      Why am I hitting a power wall with my stroked RB25?

      By GTSBoy · Posted

      You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
×
×
  • Create New...