Jump to content
SAU Community

Just Jap

R34GT-t_07
 Share

Recommended Posts

Ruffels Veteran

Ruffels

Posted
Posted

oh hell yeah... i loved my justjap cooler.. will prbably get another for my r32... great quailty... pressure drop was non existant at 10psi and cooling efficiency was fantastic

i think unless your persueing massive horsepower.. hks and other brandy are just a waste of money

-Ruffels

Link to comment
https://www.sau.com.au/forums/topic/121381-just-jap/page/2/#findComment-2248487
Share on other sites
Blitz Grand Master

Blitz

Posted
Posted
so by gathering most peoples commnets, say 250rwkw would be sufficient for just jap coolers?

Easily, they have customers running their bar and plate intercoolers on heavily modified vehicles running between 300-400rwkw happily

250-300rwkw is no problem at all.

Link to comment
https://www.sau.com.au/forums/topic/121381-just-jap/page/2/#findComment-2248819
Share on other sites
siddr20 Grand Master

siddr20

Posted
Posted

Yup a friend of mine bought a delta fin core when it first came out. THink it was last year!! Worked great on his modded 33.

Justjap sell the delta fin core for 199. Not to sure on cost of piping or the whole kit deal.

But very nice looking core indeed.

Link to comment
https://www.sau.com.au/forums/topic/121381-just-jap/page/2/#findComment-2248889
Share on other sites
Mr_G Mentor

Mr_G

Posted
Posted

I had one of those delta fin cores which I bought when they first stepped into australia. Had it on the car for over a year, and had no dramas what so ever, was pushing 211rwkw.

Looks nicer than the typical bar and plate cores, and efinately lighter...

If anyone wants to buy my tube & fin genuine hybrid core, its up for grabs as im keen on another delta fin one :)

Link to comment
https://www.sau.com.au/forums/topic/121381-just-jap/page/2/#findComment-2249328
Share on other sites
vspecll Contributor

vspecll

Posted
Posted
Easily, they have customers running their bar and plate intercoolers on heavily modified vehicles running between 300-400rwkw happily

250-300rwkw is no problem at all.

Yep, i have one on my R33 GTR 326rwkw no problem I have an inlet temp gauge plumbed after the intercooler and my inlet temp even on the dyno with 25psi is 40degrees max, on the street it is normal to read just over the days temp.

Awsome for the price :)

Link to comment
https://www.sau.com.au/forums/topic/121381-just-jap/page/2/#findComment-2249879
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      100% the factory sender is tapered, that is how it seals (well, that and teflon paste or tape)
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Thanks folks - I've saved a few links and I'll have to think of potential cable/adapters/buying fittings. First step will be seeing if I can turn the curren abortion of a port into something usable, then get all BSPT'y on it. I did attempt to look at the OEM sender male end to see if it IS tapered because as mentioned you should be able to tell by looking at it... well, I don't know if I can. If I had to guess it looks like *maybe* 0.25 of a mm skinnier at the bottom of the thread compared to where the thread starts. So if it is tapered it's pretty slight - Or all the examples of BSPT vs BSPP are exaggerated for effect in their taper size.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Have a look at that (shitty) pic I posted. You can see AN -4 braided line coming to a -4 to 1/8 BSPT adapter, into a 1/8 BSPT T piece. The Haltech pressure sender is screwed into the long arm of the sender and factory sender (pre your pic) into the T side. You can also see the cable tie holding the whole contraption in place. Is it better than mounting the sender direct to your engine fitting......yes because it removes that vibration as the engine revs out 50 times every lap and that factory sender is pretty big. Is it necessary for you......well I've got no idea, I just don't like something important failing twice so over-engineer it to the moon!
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
×
×
  • Create New...