Jump to content
SAU Community

Recommended Posts

I need some help/advice from you comp experts here. My internet seems to be dropping out quite frequently and it annoys me - for instance when Im downloading something. What I would like to ask is if this is a isp issue or how my lan is configured. Im using a D-Link wireless router with my comp using a wireless adapter, if that helps. What Im stumped with is that I can understand dail-up timing out every 4 hrs or so but not with ADSL. Any ideas?

Link to comment
https://www.sau.com.au/forums/topic/121582-computer-networkinternet-gurus/
Share on other sites

Try using a cat5 cable - if you can

Watch the adsl light on the modem, if it starts blinking when it dropps out, it means it cant reach the exchange, call telstra.

make sure the modem is not overheating - is it sitting on carpet?

turn the modem off and on, does it come back, or do you need to re-start your computer.

Run ad-aware and use firefox as a browser

Can you ping the modem when it dropps out?

Give these a go, pm me with the results

Cheers

Dave

The modem is using the latest firmware and is quite ventilated. No cables are used because our computers are not physically conected to the modem - ie were all using wireless adapters. The isp that Im with is Internode - so in saying that, has other people with internode experienced the same problem? I remember also that when the connection does drop out, only sometimes do I need to reset the modem. If I wasnt paying so much for internet then I wont be making a big deal out of it but then again its a problem none the less.

u should have told me last nite whe i was over, i would have looked at it..i had the same prob with mine, n i got netgear router/wireless, the prob was the phone lines were old n 2 much data made it cut out, internode reduced the speed down to 8mb, which is still ok, and now dotn have it anymore...occationally cuts out in afternoon, but im not home so i dont care :)

ring the up n get them 2 test the line 4 u

My first guess is the router. Net Gear is budget equipment (good for the price - but this is the sort of thing you have to put up with)

Since others have offered better quality options, give them a go and see if it fixes things.

ADSL is always dependant uon the quality of the connection (a common weak link) so this is a possible concern but I would have thought you would get problems at other times aswell (do u loose the signal when your system is idol?)

Cabel is a safer and faster option but isny always convinient. If you can borrow a 30-40m cabel and try it out it may help.

i hope this helps.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello, just just bought an 1999 enr34 with a stock rb25neo and I'm looking to upgrade the engine to 500whp I know some basic things but wondering if there are things I'll need to do to upgrade the stock block and all the bits and pieces to achieve this.
    • Thanks everyone for the replies and suggestions. Got the seats out (hoping I could find some existing grommets but no such luck). By tapping and measuring etc. I could figure out where I could drill through if needed. But first I borrowed an inspection camera and managed to go through factory holes in the chassis rail and could see that the captive nut was holding steady which is why it could retighten. So it was indeed a stripped section of thread, so I applied downforce by levering the bolt head with a screwdriver and went slowly back and forth until it came out. Camera helped a lot cos I could monitor that the captive nut was holding tight. Now I just have one very seized main subframe nut to tackle 😅
    • BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 🫠    
    • I've tried all different combinations of BOVs/ no BOV and stock bypass valves over the years, on gear changes the stock bypass valve seems to get the car back on boost quicker because in part the turbos wheel speed isn't being slowed down by reversion, although they have issues holding boost much over the stock setting. Most aftermarket BOVs you can adjust the spring, tighter will make it open later and close sooner, but in my experience it'll cause a bit of flutter at low load/rpm anyway. I've also got some input into this whole no bov causing turbo wear, never had an issue on any on my turbos HOWEVER, I got my R33 GTST with 200k kms on it, with from what I can see still has the original turbo, no lateral shaft play but has about 4-5mm of play in and out which to me seems like a worn thrust bearing from years (100-150k kms?) of turbo flutter running no bov, so maybe there is some truth to it in the long run. But that'll never stop me loving the Stutututu while I have the car.   OP just wants to know if he can run a atmo vented BOV with no major issues and the answer is YES, plenty of people do it, there's no harm in installing it and seeing how it runs before spending $$$ on an aftermarket ecu, last time I bought a Nistune it was $2400 for install and a tune , unsure of todays prices but you get me. Crazy money to spend just to fix the minor inconvenience of stalling that can be overcome by letting the revs come down to near idle before putting the clutch in or a little bit of throttle to avoid it. You're better off leaving the ecu and tune for after a bigger turbo/injectors have been installed to take full advantage of the tune and get your moneys worth.   Let OP have his Whoosh sound without trying to break his bank haha
    • I see you missed the rest of the conversation where they have benefits, but nothing to do with avoiding breaking turbos, which is what the aftermarket BOV made all the fan boys, tuners, and modders believe was the only purpose for them...
×
×
  • Create New...