Jump to content
SAU Community

Recommended Posts

I need some help/advice from you comp experts here. My internet seems to be dropping out quite frequently and it annoys me - for instance when Im downloading something. What I would like to ask is if this is a isp issue or how my lan is configured. Im using a D-Link wireless router with my comp using a wireless adapter, if that helps. What Im stumped with is that I can understand dail-up timing out every 4 hrs or so but not with ADSL. Any ideas?

Link to comment
https://www.sau.com.au/forums/topic/121582-computer-networkinternet-gurus/
Share on other sites

Try using a cat5 cable - if you can

Watch the adsl light on the modem, if it starts blinking when it dropps out, it means it cant reach the exchange, call telstra.

make sure the modem is not overheating - is it sitting on carpet?

turn the modem off and on, does it come back, or do you need to re-start your computer.

Run ad-aware and use firefox as a browser

Can you ping the modem when it dropps out?

Give these a go, pm me with the results

Cheers

Dave

The modem is using the latest firmware and is quite ventilated. No cables are used because our computers are not physically conected to the modem - ie were all using wireless adapters. The isp that Im with is Internode - so in saying that, has other people with internode experienced the same problem? I remember also that when the connection does drop out, only sometimes do I need to reset the modem. If I wasnt paying so much for internet then I wont be making a big deal out of it but then again its a problem none the less.

u should have told me last nite whe i was over, i would have looked at it..i had the same prob with mine, n i got netgear router/wireless, the prob was the phone lines were old n 2 much data made it cut out, internode reduced the speed down to 8mb, which is still ok, and now dotn have it anymore...occationally cuts out in afternoon, but im not home so i dont care :)

ring the up n get them 2 test the line 4 u

My first guess is the router. Net Gear is budget equipment (good for the price - but this is the sort of thing you have to put up with)

Since others have offered better quality options, give them a go and see if it fixes things.

ADSL is always dependant uon the quality of the connection (a common weak link) so this is a possible concern but I would have thought you would get problems at other times aswell (do u loose the signal when your system is idol?)

Cabel is a safer and faster option but isny always convinient. If you can borrow a 30-40m cabel and try it out it may help.

i hope this helps.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Nismo, any chance in the world you still have these seats?
    • I'd say closer to OG GTX3582R, just smaller trim - so 59mm inducer/82mm exducer as opposed to 62/82 for the first gen GTX3582R. Yeah EFRs were boss, the EFR8474 is still an absolute beast and it perplexes me that people still go to things like Turbosmart/Garrett etc when the results people are getting with those are pretty unremarkable compared to what you could get with a turbo available well before those options came out.  DriftSquid (I think) "upgraded" from an EFR9174 to a Turbosmart turbo and promised a comparison video - and kinda shuffled awkwardly and did a bit of diversion from the fact that they didn't get any improvement going to the currently massively hyped brand of turbo from a turbo that was a bit of a frankenstein that had been well superceded in it's own range before the Turbosmart unit he put on there even came out. I suspect the EFR would outperform most Xonas for what a lot of less-insane RB owners would go for, in the 400-600kw range but the Xonas are looking hard to beat up to maybe in the mid 700kw range at this stage- basically where EFRs don't really reach, and before the Precision turbos take over.  What the Xonas do well in the "EFR range" is be easier to package etc, and work very well if a divided housing doesn't suit your application.  
    • Are you sure the gasket is blown? What are the issues? Thermocure is the only flush I've seen do anything with rust, very impressed with that, Prestone, rust will be by the pool having a cigarette.  
    • And since the flush you have a blown head gasket? Have you lifted the head off yet?
    • The answer is to get a hold of the wiring diagram, work out what voltage is supposed to be where, when, and then work out why it is not there, then. I can't speak to the HR34 stuff, because I have never paid any attention to the NAs. There is a possibility that the turbo diagram will help, but it could also be different - depending on whether there is an FPCM on the NAs.
×
×
  • Create New...