Jump to content
SAU Community

Recommended Posts

My R33 s1 has vents on the parcel shelf, just at the bottom of the rear window. They are basically just an open vent into the boot.

Is this how they're supposed to be?

I thought i read somewhere that these were like a rear window demister (like the windscreen vents are), through the aircon.

When the car is outside on a cold night, the back window ices up from the inside, through these vents.

Is this just how they are? opening straight into the boot area?

Link to comment
https://www.sau.com.au/forums/topic/121971-rear-window-vents-on-parcel-shelf/
Share on other sites

Cool, that's a relief. I thought the previous owner may have butchered it up or something.

So there's no cover or anything under there? U can see straight through the vents if you stick your head up from inside the boot?

Cool, that's a relief. I thought the previous owner may have butchered it up or something.

So there's no cover or anything under there? U can see straight through the vents if you stick your head up from inside the boot?

mine had a rubber flap on mine..

i believe it is there to allow the doors to close easily ie remove the pressure lock inside the car when you close the last door..

there is another vent like this on the drivers side rear quarter panel, under the car

Yea the vents are like that stock, I removed mine long time ago as the plastics and thin wood sheets have broken, so just made a new one out of 5mm MDF

There's this silver box with wires on top of the driver side suspension struts which I have no clue what it does, I had to take it out because it was in the way of my rear strut brace, anyone got a clue if its anything important?

I might just block those vents, although i was considering replacing the whole shelf with mdf, for mounting some decent speakers.

Not sure what that box is, but at a guess, i'd say it's important enough to leave in.

thanks for ur help ppls. once again. this is a great forum, excellent community.

only had my R33 for 2 weeks now. and loving it. :laugh:

There's this silver box with wires on top of the driver side suspension struts which I have no clue what it does, I had to take it out because it was in the way of my rear strut brace, anyone got a clue if its anything important?

When i was looking to install 6x9's in my parcel shelf i read a post telling me not to remove it as its important. I guess if you do a search about 6x9's you might find the post i read.

have you got a strut brace accross your parcel shelf? just lowered my car today so i know what your talking bout but i didnt think you could put a strut brace accross the actual strut towers. ive got a gtr one in the boot behind the little carpet wall thingy. thought that was the only spot for a rear strut brace.

I didnt think you could put a GTR strut brace into a GTS-t which is why I found these one that go above tha parcel shelve, Im in the process of drilling holes in my mdf panel to accomodate the brace towers. which means I have to recarpet the mdf.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...