Jump to content
SAU Community

Apexi Power Fc R34 - Just Plugged It In?

Tough R34
 Share

Recommended Posts

Tough R34 Rising Star

Tough R34

Posted
Posted

:blink: hi guys

i just plugged in the power fc into my car tonight. Im stressing about the engine light flashing and idle dropping. i have read the thread for the Apexi FAQ's but i dont have the hand controller to reset/change the max limit values.

No major changes have occured (when driving) since the changeover from the stock ecu.

Anything i can do without the hand controller to stop these issues, engine light & idle?

cheers

steve

:)

hypo32 Contributor

hypo32

Posted
Posted

hi steve

i was just wondering if you are interested i buying a hand controller for a power fc because i have one from a r34 gtr. you might have to find out if it works on your computer first. if interested let me know im after $250 plus postage because im located in sydney. my email is [email protected].

cheers

charlie

paulr33 Grand Master

paulr33

Posted
Posted

if youve just installed it and have no hand controller the check light will be on due to the boost kit not being present. youll need a hand controller to turn it off. i highly recommend a hand controller for every day use and ease of control. after all, thats what you brought a standalone engine management system for. to manage it

sewid Grand Master

sewid

Posted
Posted
hi steve

i was just wondering if you are interested i buying a hand controller for a power fc because i have one from a r34 gtr. you might have to find out if it works on your computer first. if interested let me know im after $250 plus postage because im located in sydney. my email is [email protected].

cheers

charlie

GTR hand controller wont work on his PowerFC. Different part number.

On the other hand i need one for GTR.

Ill email you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...