Jump to content
SAU Community

Recommended Posts

Just wondering if there are any difficulties in doing this job?

I have been having trouble with 4th gear for a while now and after reading over the RB20 Box thread beleive it to be the 4th gear syncro.

Now would anything need to be changed re: Push to Pull clutch? Diff's?

This is something i'd like to look at doin even if the box is still alive as i would like it to be strong but i don't have the option of going to a RB25 box even though the GTR box is very similar.

Any help would be appreciated.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/122344-converting-r32-gts4-to-gtr-box/
Share on other sites

As far as I am aware the two gearboxes are the same except for the input shaft, ie same strength... This is part of an email I recieved from daniel at fitzpatric speedworks:

If manual the gearbox will take it no probs they are basically the exact same as a gtr except the input shaft size and this isnt where the weakness is, but a gts4 box will be fine for 250rwkw as long as you respect it and dont flat change or violently drop the clutch etc

Hope this helps ;)

hnr32 (gts4) and previous-term bnr32 (gt-r) boxes are both push-types, from 1993 all bnr boxes are pull-type.

There is a difference in gear ratios -- bnr box has 1,2,3,5 gears "longer" cause it is more suitable for high torque engine.

afaik both boxes are equally strong and there is no differences in reliability.

p.s. since bnr32 and hnr32 have different final gear ratio -- they should have different speedometer gears in transfer case and different speed sensors. i`m not sure -- it is wise to check it with NISSAN FAST.

As i'm "PLANNING" a rebuild with Cams, Cam Gears and a 2530/5 with the rest of the supporting goods would it be safe to say the GTR box would be a good option then with the added power/torque (as far as dealing with the ratios)?

As i know the ratios are different because i'd be lucky to get 45-50km/h tops out of 1st in my GTS4. Now i'm not after some stupidly high 80km/h in forst or anything.

Im just after something with a little taller ratios thats all?

Any opinions?

Edited by MADGT4

im fairly sure my R32 gts-4 has a gtr box in it.. but it was put in when my gts-4 was converted from auto to manual.. mot likely in japan

anyone wanna varify if this is a gtr box or not

boxbox.JPG

-Ruffels

You won't be able to tell from the outside, the box casing is the same and as far as I know the numbers are too. The only way will be to check the speedo against a gts4 with a gts 4 box or jack the car up, car in 1st, wheels off ground (supported by stands of course) and turn the engine over by hand and count how many times it takes to turn the prop shaft 1 turn - and compare against the gearbox ratios of the two boxes.

Edited by gts4diehard

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...