Jump to content
SAU Community

Recommended Posts

hey guys, ok i went away for a week and a half came home and my R33 gtst wouldnt start the car was perfect when i left. came home had no power at all, tried jumpstarting it, got power to everything but when i tried to start it, it made a ticking noise for a while then nothing, tried a couple of times and got the same result.

Next day went out same thing no power tried charging it, still nothing, then i had power to everything tried starting it got nothing all my lights work everything but wont turn over it stopped making the ticking noise but still wont turn over, i checked my battery that fine, tried tapping my starter did nothing. all fuses are good spark plugs are good.

NEED HELP ASAP, thought maybe it had something to do with my imobiliser, but doesnt seem to.

i heard u cant put a starter from an auto into a manual is this true?

what else can i try...

Link to comment
https://www.sau.com.au/forums/topic/122605-r33-wont-start/
Share on other sites

Ermm. Sounds like your battery died.

Either:

It has a tiny bit of juice to work the lights, but not enough to start. The clicking noise is usually the solanoid that pushes the starter gear onto the ring-gear (or whatever manuals have)

Or:

Did you jump it from the battery in the boot, or off the fusepanel under the bonnet like you're supposed to? If you have a good battery, but still nothing happens, you could have blown your starter motor fuse. Check that fuse.

Either way, if the battery died after a week, it's time to replace it.

Link to comment
https://www.sau.com.au/forums/topic/122605-r33-wont-start/#findComment-2264876
Share on other sites

chances are its your battery as RANDY said.

to get it started keep the car thats jumping you at around 2000rpm with all electrics off (radio, lights etc), give the battery time to build up some power then turn it over.

i bought a new (cheapo) battery after the first time i got my car on the road after the first rebuild, 2 days later i took it off the road (didnt disconnect it) and 2 months after that i tried starting it and not only was it a complete c**t to start, it wouldnt turn back on if i turned it off.

moral of the story - disconnect your battery if you're not going to drive it for a while, especially if its crappy/old.

Link to comment
https://www.sau.com.au/forums/topic/122605-r33-wont-start/#findComment-2265197
Share on other sites

i got the sameproblem mate, wqent away for the long weekend and left my f***n light in the car on, the car didnt start , even with jumper leads from a barina the car was making a ticking noise but just wasnt turning on... i had a 6 month old battery so the nrma came and jump started it with a high powered battery,

my guess is skylines need alot more power than normal to start????

Link to comment
https://www.sau.com.au/forums/topic/122605-r33-wont-start/#findComment-2265947
Share on other sites

i took the battery out and put it in another car and it worked perfectly, and had it tested so i know its deffinatly not that.

i checked the fuse's there all good.

You're talking apples and oranges. A half-dead battery that couldn't start a V10 Viper would have little trouble coughing up the CCAs to start a Toyota Echo, if you follow what I mean.

What voltage do you have on the battery? How did you have it tested? The only reason people are pushing the battery thing is because all your symptoms are the same as a dud battery.

The only other potential cause could be your immobiliser. Depending upon the model, it may be built to detect a loss of power and shut itself down (ie immobilise the car). It's a long shot though as you've already said you can hear the starter solenoid firing...

Link to comment
https://www.sau.com.au/forums/topic/122605-r33-wont-start/#findComment-2266498
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
    • Hi @Chupapy i had several leaks from coolant pipes being corroded, i also had one leak on back of the head onto transmission. For me that leak was from the turbo water line. Follow the line to the back of the head The hose and metal pipe had perished these are the best pics I took of it at the time
×
×
  • Create New...