Jump to content
SAU Community

Recommended Posts

AFter a session with the search button and nothing returned on me i just want to ask what is the best way to remove those hideious badges that reside on my car's arse?

i was told eucalytus oil?and a plastic knife?? thing is on inspection those badges look like they really stuck there and i am worried any attempt in pulluing them off will pull off paint, being such an old car/paint.

tips/advice/procedure??

cheers.

Jam a chisel, or somethin similar, like say maybe a flat blade screwdriver..? In behind the badge, get yourself a decent sledge hammer. Now this is important, its got to be big. If you struggle to pick it up with one hand, your doin well... Make sure your shoulders are quite warmed up, and be prepared for the blow. If all goes well, that badge should come off no worries. Hope this has been helpfull.

ROFL i must agree with HIPSI Gossies is pretty bad, one of the worst places to leave ANY car... haven't parked at Midland train station and i dont intend to either...

Back on topic

Best method ive found is to use Tooth Floss. Its worked 4 times for me in the past, maybe fishing line could work as well :(

Midland Nah!! Go Gossies mate. Those badges will be gone, centre caps, wheels, interior. :D

pffffffttttttttttt my gtr is parked in gossie all day every day and i aint been badged there i was badged in freo :D

Do it slowly, and the reason for the plastic knife is so you dont scratch the metal. You just need to break down the glue so whatever does that. :D

What badges are you talking about here as well?

Use a hairdryer to heat up the badge. Slowly try to peel it off. If the glue is not soft enough, heat the badge more a little. Sooner or later the glue will become so soft that u can peel it off without leaving a stain.

P/s: This will effectively destroy the badge too.

I took the "gtst25" sticker off of my boot and the S badge from the bonnet by heating them up with a hairdryer and using a credit card on the sticker and then some eucalyptus oil to get rid of the residue.

To get the badge off of the bonnet, I heated it up with the hairdryer and used fishing line to dislodge the badge from the goo, heated it up more with the hair dryer and peeled it off with a credit card and again, the eucalyptus oil to remove the residue.

All up it took me about 40 minutes or so (I was being cautious).

Hope this helps.

Regards,

Jason.

I took the "gtst25" sticker off of my boot and the S badge from the bonnet by heating them up with a hairdryer and using a credit card on the sticker and then some eucalyptus oil to get rid of the residue.

To get the badge off of the bonnet, I heated it up with the hairdryer and used fishing line to dislodge the badge from the goo, heated it up more with the hair dryer and peeled it off with a credit card and again, the eucalyptus oil to remove the residue.

All up it took me about 40 minutes or so (I was being cautious).

Hope this helps.

Regards,

Jason.

That sounds the best method yet.. :D

best thing for removing the residue that I have found is a liquid called dissolveit. wipe it on and all traces of the glue residue is gone. Plus it works great on materials, so can remove any sticky leftovers from the seats, door trims etc :wub: hahaha

best thing for removing the residue that I have found is a liquid called dissolveit. wipe it on and all traces of the glue residue is gone. Plus it works great on materials, so can remove any sticky leftovers from the seats, door trims etc :P hahaha

i know we all like our skylines, but 'sticky residue' on the seats?

c'monnn jason! :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...