Jump to content
SAU Community

Rb25det Base Timing


Recommended Posts

Hi Guys,

Just had my car on the Dyno recently and they've discovered something strange. When setting my base timing to about 15 degrees, the CAS is almost fully retarded??

Initially thought that the Timing Belt could be one tooth out but when checked, the dots lined up fine. Next thought was that the CAS was faulty, so swapped this over and still the same result.

Anyone have any thoughts on what else I could check as something doesn't appear to be right?

Cheers,

Mike

Link to comment
Share on other sites

either there timing light is fuched

or ..

(

asuming its not an autronic or something that needs a differant trigger disc inside the cas)

you need a new harmonic balancer as the outer ring has slipped on its self.

Link to comment
Share on other sites

same thing happened when my car got put on a dyno. they ended up adjusting it to where it ran best but if you read where they set it off the light it was rediculously advanced cant remember exactly how much but it was like high 30's

Link to comment
Share on other sites

Proberly got the timing light pick-up in the wrong spot!

Coil number 1 is were it should be taken from.

Cheapish timing lights will do this.

'sometimes' it will read correctly if they double loop the coil 1 wire located at the ignitor. Providing its a s1.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



×
×
  • Create New...