Jump to content
SAU Community

Recommended Posts

hi guys ive recently bought a r33 gts t

im new to these cars and the a lsd light comes on sumtimes for no reason as far as i know can any one help me with this is this a common problem and also are there certain hydraulic pumps and computers to check for the lsd or anything like this any info would be great cheers

Link to comment
https://www.sau.com.au/forums/topic/123814-a-lsd/
Share on other sites

Yes skylines can have an A-lsd light.

It means you have an active spec LSD version of the skyline.

Run some searches there's a shipload of info on this site about the A-Lsd.

As for it intermitently turning on. Do you have a power-fc? If you do I strongly suggest you look at the signature of a guy on here called PaulR33 as this is a fault that happens with the A-lsd failing and power fc's, but he's got the cure (read: DIY) to fix the problem.

If you don't have an Power FC.

Perhaps a fault with your abs sensors or the computer itself, or the hydralics, or a lack of fluid?

Link to comment
https://www.sau.com.au/forums/topic/123814-a-lsd/#findComment-2286171
Share on other sites

Some Gtst's came with the vspec diff you are very lucky as they are a rare option.

The A-LSD light in the tacho it only comes on if there is a problem. The ECU for the ALSD is in the boot. Does it stay on always or just come on now and then?

Chris

Link to comment
https://www.sau.com.au/forums/topic/123814-a-lsd/#findComment-2286173
Share on other sites

Nah, Actually, this site is pretty gay regarding a-lsd. I keep asking about certain things about a-lsd.

No one knows what fluid it uses. no one knows how to bleed the system.

No one actually knows how it performs relative to the normal gtr 2way diff.

Searching will get you info about fully sik people talking about fully sik stuff. but nothing actually useful about the a-lsd.

Like there's info about how people have installed fully sik power fcs into their fully sik skylines to make them fully sik and go quicker.

does someone actually know anything useful about the a-lsd? if so, please post.

Link to comment
https://www.sau.com.au/forums/topic/123814-a-lsd/#findComment-2286188
Share on other sites

Check fluid in a space in the boot on the right hand side, you'll see a little canister behind a little clipped on segment.

The fluid it takes is power steering fluid.

As for the microtech, this might be causing the problem, from memory the A-Lsd computer requires a signal from the ECU that aftermarket computers generally don't give and have to be modified to suit.

Here I've run the search for you, check this link out:

http://www.skylinesaustralia.com/forums/in...howtopic=107656

Now I realise that you don't have a power Fc, but the premise behind the solution should be the same for the microtech.

Link to comment
https://www.sau.com.au/forums/topic/123814-a-lsd/#findComment-2297867
Share on other sites

Yes skylines can have an A-lsd light.

It means you have an active spec LSD version of the skyline.

Run some searches there's a shipload of info on this site about the A-Lsd.

As for it intermitently turning on. Do you have a power-fc? If you do I strongly suggest you look at the signature of a guy on here called PaulR33 as this is a fault that happens with the A-lsd failing and power fc's, but he's got the cure (read: DIY) to fix the problem.

If you don't have an Power FC.

Perhaps a fault with your abs sensors or the computer itself, or the hydralics, or a lack of fluid?

hmmmm. i love it when people get credit for my work :

putting it simply.. while driving the light will come on when the wheels slip. (lets you know its working)

if not. you need to aply the tps signal to the a-lsd ecu. just check "moonie" 's topic on a-lsd. i fixed it for her at wsid :dry: with a multimetre and some eletrical tape :)

Link to comment
https://www.sau.com.au/forums/topic/123814-a-lsd/#findComment-2300251
Share on other sites

hmmmm. i love it when people get credit for my work :

putting it simply.. while driving the light will come on when the wheels slip. (lets you know its working)

if not. you need to aply the tps signal to the a-lsd ecu. just check "moonie" 's topic on a-lsd. i fixed it for her at wsid :) with a multimetre and some eletrical tape :whistling:

Hey man, apologies, credit where credit's due.

I just remembered following the post about the fault with the A-Lsd (As I have one in my car, but my ecu is still standard), and remember Paul copying it to his link on FAQ on A-Lsd's.

Link to comment
https://www.sau.com.au/forums/topic/123814-a-lsd/#findComment-2300910
Share on other sites

how about if someone actually says how to blled the syhstem and what fluid it uses?

There is a bleeder nipple on the right hand side under the car runs along the right hand chassis and is roughly above the diff cradle. Make sure the car is running and bleed out the air from there.

It is difinitley power steer fluid. It will also read low when the car is off! So don't over fill it.

Link to comment
https://www.sau.com.au/forums/topic/123814-a-lsd/#findComment-2301216
Share on other sites

cheers for all the info guys i mite attempt to bleed it on the week end there is red oil ontop of another coloured oil like some one said on a previous post in my canister so i mite replace it can anyone tell me a specific type of oil to use and a rough price

cheers guys

Link to comment
https://www.sau.com.au/forums/topic/123814-a-lsd/#findComment-2308992
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...