Jump to content
SAU Community

Recommended Posts

Hey just wondering if any one could tell me if optimax is 96 or 98 octane. I normally fill up at BP on 98 octane (premium) but filled up on optimax today.. Since filling up on the stuff my car has lost all power and feels like it did before installation of my new pump (slow as crap, no power at boost, farting etc).. This has all co-incided with my alternator/battery getting consistently worse, and i was just wondering if the optimax was 96 octane, because that would probably make more sense, than my battery/alternator getting worse so fast

thx

Edited by r32 gts-turbo
Link to comment
https://www.sau.com.au/forums/topic/124055-optimax-96-or-98-octane/
Share on other sites

hi

Ive always sworn by BPultimate & optimax but just last week i got about 50kms more out of a tank using Mobil petrol(synergy). I only used it by chance but it worked out better. the performance improved aswell & i was using the power a little more, compared to with the other fuels.

My friend had the same situation with his 05wrx, he agreed. i have a r34 and ill be using Mobil more regularly now.

cheers

steve

hi

Ive always sworn by BPultimate & optimax but just last week i got about 50kms more out of a tank using Mobil petrol(synergy). I only used it by chance but it worked out better. the performance improved aswell & i was using the power a little more, compared to with the other fuels.

My friend had the same situation with his 05wrx, he agreed. i have a r34 and ill be using Mobil more regularly now.

cheers

steve

I hear the synergy is better then ultimate or optimax. I wish we had it in QLD. I always used bp, as their fuel is refined to 98 ron while optimax ( from what I have been told) has sh*t added in to bring it up to 98 ron

I was under the impression that Optimax was actually 99RON. I remember reading something about it a while back, it is the highest octane fuel available (until they released Extreme - 100RON).

Also, the V8 Supercars use Optimax, so it can't be that bad, I have used all 4 types of Hi-Octane Premium, and I am buggered if I can tell the difference.

Yeh sorry meant ultimate not premium. Filled up with ultimate today and its better. Doesn't stutter anymore and pulls harder on boost (althought not as hard as it did before putting optm.. weird..) Probably some rooted fuel related sensoor somewhere doesnt like the optimax and makes my car frig up or something. Ill try the mobil tomorrow and post back if i notice any difference

Edited by r32 gts-turbo

Shell Optimax 98

Shell Optimax Extreme 100

Mobil Synergy 8000 98

BP Ultimate 98

United Boost 98 Umm 98 maybe

Some cars dont like to be run on Optimax due to the additives that are in the fuel, detergents etc can foul the plugs (heard of it being more common on motorbikes) My old car used to get the occassional miss and get 50 kms less to a tank when i used the Optimax

And with the new car, i use BP Ultimate and Mobil 8000, never had any dramas with either of these.

This subject has been discussed so many times in so many threads. I am not going to tell the whole story again, if you want more than this post do a post search, "Sydneykid" and "refinery".

Oil companies have a policy called "refinery sharing/exchange" because it is simply not economical for each oil company to have a fully equiped refinery in each state. Refineries need volume to make money, it's that simple. Do a Google search on "oil refinery sharing", you will find ALL oil companies in Australia refinery share.

For example, there is NO BP REFINERY IN MELBOURNE, so do you think they ship it in, millions of litres per week in tankers from WA or Qld? Like hell, they refinery share and buy (swap) the fuel from a local refinery. If you want to know what refineries are in Melbourne (don't forget Geelong) look it up in your yellow pages. When you buy fuel at a BP servo, chances are you will be pumping fuel from one of those refineries not a BP refinery.

A quote from the BP Australia web site tell it all....

"A particular feature of the Australian oil industry is the practice of refinery exchange, in which refining companies exchange products in various locations to minimise distribution costs. For example, BP supplies other companies in Perth and Brisbane and in return is supplied with product in Melbourne, Sydney and Tasmania."

:D cheers :P

Edited by Sydneykid
Hey just wondering if any one could tell me if optimax is 96 or 98 octane. I normally fill up at BP on 98 octane (premium) but filled up on optimax today.. Since filling up on the stuff my car has lost all power and feels like it did before installation of my new pump (slow as crap, no power at boost, farting etc).. This has all co-incided with my alternator/battery getting consistently worse, and i was just wondering if the optimax was 96 octane, because that would probably make more sense, than my battery/alternator getting worse so fast

thx

no, it doesn't make more sense. your rough running problems are much more likely (ie 99.99999999%) to be caused by your charging problem resulting in poor/weak spark. This would be especially noticeable under load/boost or at night (ie when your lights are on).

Edited by hrd-hr30

most of the "perceived" differences in 98 octane fuels are usually just in your head. I have a friend who works for shell, who says all the 98 octane fuel is exactly the same, (actually not technically true, i think the united boost uses ethanol in their fuel)

though, i do have a couple of friends who call optimax "opti-ping"....

i generally use either optimax or bp ultimate, and i don't notice any difference at all

I fill up with BP when I don't have a 4c discount docket, but when I do, I fill up at Shell. So my 32 is pretty much 50/50 on Ultimate and Optimax and tbh I notice no difference swapping fuels.

And from what Sydneykid said, it's probably because it's all the same anyway!

ive heard all the fuel myths and dont believe any of them myself.

ive heard more than 50ks difference on a given brand xyz fuel rating (sounds like driver habits if anything).

ive heard more or less engine and performance between 98 rated brands and so on. ive always used optimax and never had problems. ive tried the other brands as a bit of humour to try out some rumour and it all feels the same.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I just changed the timing belt on my RB25DET NEO and wanted to get some opinions. I’ve been super cautious, did a lot of research, and took my time. I’ve driven the car, and it runs fine. After warming it up, I revved it to 8000 RPM a few times—no issues, everything held up.   After the drive, I heard a noise that I think is either the clutch or possibly a tight accessory belt. It’s not constant, just comes and goes.   I took the timing cover off to double-check everything:   Belt is on properly, Tensioner is tight, Did the 90-degree twist test—belt isn’t too tight or too loose.     What still worries me is that I noticed the belt seems to sit a little toward the front edge of the gears, especially on the idler pulley. It even looks like it’s slightly coming off the edge there. Is that normal?   My old belt (5 years old, ~3,000 miles) also showed a bit of wear on that same edge, so maybe it’s just how it sits? I’m probably overthinking this, but since it’s my first time doing this on a NEO and the engine is forged, I really don’t want to mess anything up.   Also, I’m thinking of swapping to a clear front timing cover with the glass window. Would you recommend NITO or HPI? HPI looks reputable and their covers have 2.5mm thickness, but not sure if there’s a real difference between the two.   Any advice or reassurance would be much appreciated!
    • 40 grit sounds about right, to start. You make some decent cuts/damage in the coating with that, then rapdily scale up to maybe 80 and 120 for the bulk of the actual removal, then fine it off to 180 or 240 perhaps. No need to go any finer than that, and maybe no need to go even as fine as that. Wrap it on a big block and have at it. At least on the hub face.
    • Do the GKTech rear lower control arm mount relocation, and either alloy subframe inserts or very stiff subframe bushes. Traction is going to be at a premium!
    • Hello,   My name if Frederick, i'm 30 years old and I live in Belgium, Europe! I used to have a Nissan 370z daily but since I got a company car I turned that into my seattime driftcar. About 3 years ago I also wanted something older with more feel, so I got an R32 GTST with an rb26 engine. I am now getting the rb built to have around 800hp and it's close to being finished. I'm very excited for how it will drive and how driveable it will be! Regards, Fred!
    • Appreciate the insight! Talked to some local folks and they basically told me "it's not that deep." As long as the threading on the inside matches what's at the steering rack, everything else can be constructed-to-fit. There are full aftermarket kits I can use - probably better for my car overall since it's lowered.  Example: GKTech M14 Super Adjustable Inner Tie Rod Set - Nissan Skyline R32 R33 R33, 240SX, 300ZX, 350Z / Infiniti G35 M14I-TROD-2 gktM145-TROD gktM14I-TROD - Concept Z Performance (These can be packaged with their "high misalignment" tie rod ends).
×
×
  • Create New...