Jump to content
SAU Community

Recommended Posts

hey all just about to purchase some new ROH adrenalinz in the shadow chrome for around 340 a rim, just see'n if any1 knows of a better price or more importantly a good choice of tyre to replace my 255's on the rears that are looking more like slicks... any suggestions on types that are good? i have budget 235 P5000 on the front and 255's of the same on the back...

any advice would be helpf00l

:D

ch33rs mile$

Link to comment
https://www.sau.com.au/forums/topic/12448-good-price-on-rimstyres/
Share on other sites

One word of advice, rims and tyres, DONT go to the big shops like bob jane, etc, they will rip you a new hole, and stretch it for you too.

Go to a small, local tyre guy, they dont always have everything in stock, but can get it in, and will do good deals just to get your business, cause they need it more than a big chain does.

Do your looking at a big place, buying at a small place. Saved me $700 doing it this way (wheels+tyres).

See roy or ray at Kostera's in kalamunda, r34 put me onto him and he's fantastic. Go for dunlops, fm901's or if you can squeeze it a bit more SP9000 or the Super Sport series. I got the sp9000's on the rear and they made a huge difference to the overall stability of the car around corners etc. grip well too for the drags.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...