Jump to content
SAU Community

Recommended Posts

  • Replies 238
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

After just doing a bells run with the audi guys, my theory is that it would be eaiser to meet at richmond, just before bells line of road, going from parra to richmond id imagine that heaps of people would get lost, stuck at lights etc, straight to richmond is pretty easy and if you get there at 10 you will still get to bathurst after 1ish.....

just a thought!

it would be great but remember that its still a public road and i dont know bout u guys i would be so tempted down conrod and there is always cops there.

it's not one of THOSE cruises burnsie >_<

generally people on these cruises are very well behaved and enjoy going for a sunday drive so to speak.

After just doing a bells run with the audi guys, my theory is that it would be eaiser to meet at richmond, just before bells line of road, going from parra to richmond id imagine that heaps of people would get lost, stuck at lights etc, straight to richmond is pretty easy and if you get there at 10 you will still get to bathurst after 1ish.....

just a thought!

agreed 110%

dam you soft people, 3 hour drive is NOTHING!!!!!

why not just split into two group, the softies go cruise down george st or wherever, while the hardcores go to bathurst..........SIMPLE!!!!!!

sure, George St sounds good!

looks like Bathurst is the pick of the lot




  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...