Jump to content
SAU Community

Recommended Posts

R33 gtr would be my guess too.

check the plug when you get it, compared to r33 gtr pinouts and go from there.

i doubt they would use a different ecu/harness just for the stagea given it was an aftermarket modification to stageas by autech.

good idea to look at the pinouts when the car comes. I saw a greddy one for under A$600 in Japan looks good too but tis for a r32 and r33gtrs though

thanks guys. Then next question which brand and model? And average one that will do the job

A "Power FC" is an after market computer that is made by Apexi... there is only one brand of Power FC, if you are talking about other brands of AM computers then I think most people will point you back the the PFC anyway. I hope that helps... try this link seems like the go!

A "Power FC" is an after market computer that is made by Apexi... there is only one brand of Power FC, if you are talking about other brands of AM computers then I think most people will point you back the the PFC anyway. I hope that helps... try this link seems like the go!

So "Power FC" is the model made by Apexi? Am i right? If thats the case how about othe FC brand? Which ones? Cos i cant read freaking Japanse from the freaking Hyper Rev mag. Cant read the specs

:/

theres 2 versions of the power fc and one is the air flow meter version and one gets rid of the air flow meters and uses 2 map sensors called the power fc djetro

the AFM'd version is fine for most power unless u are going totally insane and want over 500hp or so at the wheels, and even then the afm'd one is still fine.

djetro is $1600 all up with map sensors etc and normal power fc is about $980 or so

theres 2 versions of the power fc and one is the air flow meter version and one gets rid of the air flow meters and uses 2 map sensors called the power fc djetro

the AFM'd version is fine for most power unless u are going totally insane and want over 500hp or so at the wheels, and even then the afm'd one is still fine.

djetro is $1600 all up with map sensors etc and normal power fc is about $980 or so

If thats the case i will opt for the one w/o the air flow meter then. Which brand though? Hks?

its an apexi power fc djetro (non afm'd version) and its like the m800 ecu is a motec and the smc4 is an autronic, and mtx12 is a microtech

power fc is one specific ecu (well 2 versions as i said earlier) by apexi and nuthin to do with the name of aftermarket ecu's in any other brand.

hks make an f con pro ecu but they are not good because no one tunes them except one shop in Oz i think from memory

afm'd power fc is much much easier to tune and comes with a base map to start tuning from where as the djetro is a start from scratch ecu and requires a good 3-4 hours tuning just to get the engine even running.

sydneykid reccomends the afm'd version in every application due to cheaper price and easier/cheaper tuning.

ive actually got a gtr power fc djetro sitting in the box brand new in my room waiting to go on my stagea in the future once i put the other engine setup in :thumbsup:

plenty of over 500hp cars and one 890hp gtr is running a djetro in WA so they are pretty good ecu's :/

just remember over 500hp reliably in a stagea is gonna cost over 20k just in mods easy! thats engine rebuild time if u want it to last as plenty are blowing pistons and the like with that sort of power.

around 450hp is the cheapest and stock engine should last a fair while on that power level.

so what im saying is its best to use the afm'd version in 99.9% of cases, and even the vmax apexi drag gtr that runs 8 seconds still runs afm's.

its an apexi power fc djetro (non afm'd version) and its like the m800 ecu is a motec and the smc4 is an autronic, and mtx12 is a microtech

power fc is one specific ecu (well 2 versions as i said earlier) by apexi and nuthin to do with the name of aftermarket ecu's in any other brand.

hks make an f con pro ecu but they are not good because no one tunes them except one shop in Oz i think from memory

afm'd power fc is much much easier to tune and comes with a base map to start tuning from where as the djetro is a start from scratch ecu and requires a good 3-4 hours tuning just to get the engine even running.

sydneykid reccomends the afm'd version in every application due to cheaper price and easier/cheaper tuning.

ive actually got a gtr power fc djetro sitting in the box brand new in my room waiting to go on my stagea in the future once i put the other engine setup in :D

plenty of over 500hp cars and one 890hp gtr is running a djetro in WA so they are pretty good ecu's :D

just remember over 500hp reliably in a stagea is gonna cost over 20k just in mods easy! thats engine rebuild time if u want it to last as plenty are blowing pistons and the like with that sort of power.

around 450hp is the cheapest and stock engine should last a fair while on that power level.

so what im saying is its best to use the afm'd version in 99.9% of cases, and even the vmax apexi drag gtr that runs 8 seconds still runs afm's.

Thanks cruiseliner for clariying the terms. I think i will be getting the power Fc commander.

Thanks again

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...