Jump to content
SAU Community

Recommended Posts

Hi All,

I've been reading this site for a little while now, and I can see that the community here largely knows what they are on about. As I am new to Skylines, and am looking to purchase one at the end of this year when I finish my degree, I am after some information to help me make a decision.

I have been looking at getting an R33 GTS-T Series 2 as I like the look of this model, and most of the cars I have seen for sale look to be at a reasonable price. However, I would like to know from some experienced Skyline owners, just how much it costs to keep these cars in good condition, ie. what common failures occur, how much it costs to replace parts, and how difficult it is to locate replacement parts (considering these cars are imports).

My Dad has been on my back about just getting an Australian car, as it would be much easier to obtain parts, and hence not cost so much when things start to break down. However I have always liked Skylines, and would much rather own one of these than anything else.

Any information and experience that you guys can share would be greatly appreciated, and will help me make up my mind in buying one of these awesome vehicles.

Cheers,

Abruzzi.

Link to comment
https://www.sau.com.au/forums/topic/125072-new-to-skylines/
Share on other sites

They're pretty reliable cars, but just make sure you can afford to fix it when things do go wrong - most wreckers will charge a left testicle for even the smallest parts (try $320 for a power window motor and regulator). The only other things i'd advise to keep in mind are fuel and insurance, companies don't like turbo imports, and turbo imports don't like cheap 91 unleaded.

Link to comment
https://www.sau.com.au/forums/topic/125072-new-to-skylines/#findComment-2309479
Share on other sites

$320 for a power window motor and regulator is pretty exy :D . But is this a common thing I would be looking at, or is it pretty rare that this might occur?

Would anyone be able to shed some more light on the cost of general maintenance with their Skyline? Like the average cost per year on repairs for however long you have had your car.

The reason I would like to buy a Skyline is of course for it to become a bit of a hobby for me. I intend to learn how to do most general servicing (and anything I can do) myself. Whilst customizing my car to the way I want it. And so because of this I also intend to keep the car for a good number of years if I get one.

As I said, any experience you guys can share is greatly appreciate ;)

Abruzzi.

Link to comment
https://www.sau.com.au/forums/topic/125072-new-to-skylines/#findComment-2309700
Share on other sites

A late model R33 with low k's should be very reliable if servicing is kept up to date. The more common problems people have with these (and any RB engined car) is with 'coil pack' failures or dead turbo's. Both problems can be attributed to running higher than factory boost or overall km's they have seen.

If turbo failure is caused from running too much boost, the failure usually lies in the ceramic exhaust wheel falling off or shattering. In these cases it is possible for ceramic dust to find its way into the cylinders, this is when you really do have problems!

Good coil packs can be picked up 2nd hand for around $50 each. I believe they are around $200 each new from Nissan. Although people with multiple coilpack failures usually upgrade to a set (6) of 'Splitfire' brand coil packs for $550-$650 new.

2nd hand good condition turbos are around the $400 mark. Labor for replacing turbos I believe is expensive due to the time involved.

So to sum it up get the car you are interested in checked out properly. Try and get written evidence that the k's are correct. And the biggest expences you should be looking at in the coming years are fuel and insurance.

Link to comment
https://www.sau.com.au/forums/topic/125072-new-to-skylines/#findComment-2310369
Share on other sites

I've had my r32 for about a year and not a single issue (touch wood). I changed the exhaust cause the previous owner had put a really shit one on it and i put on a pod filter and did stereo work but all through choice. servicing is basic and noraml prices, only diff is oil between service, but its a turbo.. so that is a must. they are good cars and will serve well if looked after. better than a commodore :wub:

Link to comment
https://www.sau.com.au/forums/topic/125072-new-to-skylines/#findComment-2310589
Share on other sites

hi i use to own a commonwhore a 96 V6 ecotec auto and it gave me a shit load of problems especially the power steering and windows and locking!!! there crap!!! i now drive a 93 model m spec r33 gtst and it has only gave me 1 problem ,the crank angle sensor stopped working. it cost me $200 to fix. but over all id rather drive a smooth SEXY33 over anything because i beleive this model is the perfect balance between looks and power!!! very nice to drive and they are very R-elia-B-le cars providing you look after them. good luck wit gettin 1.

Link to comment
https://www.sau.com.au/forums/topic/125072-new-to-skylines/#findComment-2310911
Share on other sites

As with any used car you should thoroughly check & make sure everything is on the level, The dealership that sold me my r33 'forgot' to tell me the stereo system was farked & I didn't use the radio when I test drove... so it pays to make sure everything works, power windows, stereo, electric sideview mirrors work etc.

In general, I've found R33's build quality very good.

The only things that I've had to spend on my car was the usual 10-15km service & mods :(

What I've found to be expensive is:

Insurance (I'm a P-plater + import car + Live in West Sydney :) )

Petrol (refer to my avatar)

Mods ( U can't stop with just one :O )

Good luck with the car hunt & be sure to post some pics when you do :action-smiley-069:

Link to comment
https://www.sau.com.au/forums/topic/125072-new-to-skylines/#findComment-2313291
Share on other sites

Hi all,

thanks very much for the reply's. LOL @ the "Commonwhore" comments. At one point I was thinking of getting a Commonwhore, but the first part of the name is one of the reasons why those thoughts didn't last too long... not to mention I'd much rather not put money into doing up a family sedan...

Its good to know that the car is reliable... so its now just the insurance and fuel prices that scare me... A Skyline is what I would love to get... but at the moment I'm also looking at an S15 Silvia, or a (Nov) 2000 onwards Celica... mostly due to bringing down my long term costs (I'd like to have money to do some cool modding). However if I do decide to get a Skyline at the end of the year (or whatever I get for that matter), I'll probably take it in to RACQ to get a full check done on it... I've been told a few times its a good idea.

Does anyone have any experience with Celica's or Silvia's (specifically the models I'm talking about)?

Thanks again,

Abruzzi.

Edited by Abruzzi
Link to comment
https://www.sau.com.au/forums/topic/125072-new-to-skylines/#findComment-2313731
Share on other sites

  • 3 weeks later...

I am in exactly the same shoes you are in Abruzzi. I am planning on purchasing a line at the end of the year. And also, because of the same reasons, am a bit frightened off by the high fuel and insurance prices.

My mum used to own a 2000 model celica and I can say that they are a fun car to drive. I am yet to sit in the cockpit of a skyline, but can say that I don't think you can really compare them. I was also thinking of buying the celica of my mum, but didnt, purely because of the fact that they are still seen as a "hairdresser's car", plus the fact that i want a factory turbo car.

Let me know what you decide to purchase.

My 2c.

Gus.

Link to comment
https://www.sau.com.au/forums/topic/125072-new-to-skylines/#findComment-2352182
Share on other sites

I had my car checked out today before my mate bought it and the mechanic was saying how well built the car was, especially the suspension design and how superior it was to any of the commodores up to the latest model and even the SS models!

I don't think he'd looked under a skyline before and he was an old bloke so probably seen a lot of cars in his time and he was definately impressed with the quality of the skyline!

Link to comment
https://www.sau.com.au/forums/topic/125072-new-to-skylines/#findComment-2352276
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...