Jump to content
SAU Community

Recommended Posts

nothing of the xenon light system looks to be cut, just missing the globe, the adjuster in my cabin works too, the braided xenon system has been pushed into the back of the headlight other ppl out there check because the braid is negative potential and is not far off the positive terminal of the new headlights, i just had to do some insulating until i find some xenons.

there was a group buy for xennon lights for 250 i belive, and btw all HID kits are ALL from china now, all the german makes ARE in china, they are just labled with different brands, just have a closer look at the design and u can see. if u are still interested in a set i can get a few in, they come with 1 year warranty for H1 (skylines etc) are 250 but the H4 H/L are 350 i only got a few set left if u stil want them.

I've had a look behind the headlight and I don't see anything cut... Someone care to take a picture so I know what I'm looking at? My globes have 'japan' written on them, if that counts for anything...

lol

I haven't put those globes in - those litech ones - cause my lights are fine atm.

why is it shit ass? ive tried it its good. and i have compared it with the original its not far off. At least its much better than halogens bulbs though.

Edited by stasis
  • 7 years later...

When I took my stag to compliance shop I asked them not to remove the xenons.. lets face it, they are far better than adr approved POS.. I'll take my chances :) Went to regency (SA) for inspections and the first thing they got me to do was turn all my lights on and pop the bonnet.. (I had the lights on all the way there so they were warm), dont know if this helped or if the inspector had a big night before but totally skipped past them.. got failed but only because I didnt have an 80km/h sticker on the spare.. easy fixed. For the record, the adjustment wheel on the right of the steering wheel does absolutly nothing im pretty sure.. wtf! How would one test if it works? Oh, also had a japanese road flare still strapped in on the passenger footwell. Kinda surprised they didnt complain. Has regency gotten a little lax iver tbe years? They used to be freaking relentless. Peace

^^^add on for above post^^^

Just got home from work (12.30am), tested adjuster knob for lights on my steep as f*** driveway.. knob works great just didnt realise as when I was playing around with it the first time I was driving from melbs..

The only thing I want to know is there any difference in the S2 headlights which have the Xennon sticker/label on the front of the headlight and the ones that don't..

To me they look all the same just wondering if the reflectors are different in the lights.

Edited by BigDirtyJase

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 💪🏼 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
    • Have you confirmed the throttle body goes to WOT (and stays there) during the run?
    • I'm having a problem. I think it was mentioned above somewhere but can't see it.  I'm stuck in the cycle of, sand, filler, low spot again, put filler, sand, low spot again, now i put filler again and a thicker portion which seems to have helped but I got low spots in other areas. In the image. Circled in red thats where the original low spot was and the shape is the same as the red out line. I've more or less fixed that (still low spot up the top but now I have low spots where the green circled part is.  Is likely the issue that I didn't start with a course sand paper? I sanded the filler with 240 to reduce the risk of not going to far but maybe the issue is that I'm only taking off enough material to remove some of the filler but not the high spots. I now started sanding with 120 and I think I'm seeing a difference. I did fix one dent the other 2 are f**ked and seems like I made another low spot which is indicated by the furthest green circle on the left handside. Any thoughts and solutions?   Also second image. All of these rock chips, can they be filled in with primer or do i need to fill them all with filler/putty? So many rock chips on mine lol.
    • Well, I had an Edward Lee's special edition odo windback car/motor with a RB25DET S2 and I put down 372kW with a good amount of track abuse for 1.5 years before the ring lands decided it didn't want to stick around anymore 🥲 But probably didn't help I kept on smashing try limiter on the track and a few skid pans.
    • That is correct,  I have a forged RB25/30det NEO hiding away safely and I wanted to use the very rare greddy vct adj cam gear on this new setup and so I just used the whole thing on my s1 instead of pulling it appear because I'm lazy af 😅🤌🏼
×
×
  • Create New...