Jump to content
SAU Community

Antenna

skylinesome

By skylinesome,
in Car Audio & Electrical

 Share

Recommended Posts

RANDY Veteran

RANDY

Posted
Posted

LOL! My car arrived with a Sanyo CD player, and the same thing happened.

I got my new head unit, wired it all up (correctly) and now it only goes up with radio.

Might want to check your wiring, the bodgy person who put the first one in ran the antenna wire to the head unit's remote wire. (used for switchin on amps) That made it go up each time.

Link to comment
https://www.sau.com.au/forums/topic/125372-antenna/#findComment-2316127
Share on other sites
RANDY Veteran

RANDY

Posted
Posted (edited)

omg lol wtf!

Ditch that head unit! What kind of HU doesn't have a power antenna wire??

My first ever headunit was a Kenwood, bought for $40 from Cash Converters... about 6 years ago, and it was already a few years old at the time. IT had a power antenna wire!

Edited by RANDY
Link to comment
https://www.sau.com.au/forums/topic/125372-antenna/#findComment-2316725
Share on other sites
RANDY Veteran

RANDY

Posted
Posted

Did you install it yourself? Have you checked the wiring?

Make sure your remote wire is not touching anything (unless you run an amp, in which case it should only be connected to the amp remote wire)

I'm pretty sure that Pioneer wouldn't design it like that, and i'm very sure that R33's antenna's don't do this on their own.

Link to comment
https://www.sau.com.au/forums/topic/125372-antenna/#findComment-2318700
Share on other sites
skylinesome Enthusiast

skylinesome

Posted
  • Author
Posted

I will re check everything. When you mean make sure the remote wire isnt touching anything, do u mean that is should be connected to the remote power antenna wire coming out of the head unit?

or should i wire it so the wire for the antenna coming out of the car goes to nothing.

Did you install it yourself? Have you checked the wiring?

Make sure your remote wire is not touching anything (unless you run an amp, in which case it should only be connected to the amp remote wire)

I'm pretty sure that Pioneer wouldn't design it like that, and i'm very sure that R33's antenna's don't do this on their own.

Link to comment
https://www.sau.com.au/forums/topic/125372-antenna/#findComment-2319571
Share on other sites
RANDY Veteran

RANDY

Posted
Posted

Umm.. the remote wire FROM the HU:

If you have an amp, make sure it's connected to the amp's remote wire.

If you have no amp, that wire should be taped up and tidied so that it doesn't short on metal or anything. It should NOT be connected to your antenna wire (factory loom side).

The HU should have a "p.cont" or "antenna" or something wire... this is the one for the antenna. I'd be shocked if a modern HU DOESN'T have an antenna control wire.

I might have made that unclear...

HU "Remote" wire -> nothing

HU "Power Antenna" wire -> antenna power wire in the factory harness

Link to comment
https://www.sau.com.au/forums/topic/125372-antenna/#findComment-2321359
Share on other sites
skylinesome Enthusiast

skylinesome

Posted
  • Author
Posted

ok so let me get this striaght. The wire that powers the antenna goes to nothing.

And then the actual antenna wire just plugs into the head unit as normal.

If that is the case i dont see how the antenna will power up at all???

What i have done for the mean time is just wired it to the switch next to the a/c unit.

I might leave it like this so i can control the antenna even when i have the radio on.

Umm.. the remote wire FROM the HU:

If you have an amp, make sure it's connected to the amp's remote wire.

If you have no amp, that wire should be taped up and tidied so that it doesn't short on metal or anything. It should NOT be connected to your antenna wire (factory loom side).

The HU should have a "p.cont" or "antenna" or something wire... this is the one for the antenna. I'd be shocked if a modern HU DOESN'T have an antenna control wire.

I might have made that unclear...

HU "Remote" wire -> nothing

HU "Power Antenna" wire -> antenna power wire in the factory harness

Link to comment
https://www.sau.com.au/forums/topic/125372-antenna/#findComment-2322766
Share on other sites
skylinesome Enthusiast

skylinesome

Posted
  • Author
Posted

ok after reading it agian it makes sense. My bad

But that is how i have wired it but the antenna still comes up when playing a cd.

ok so let me get this striaght. The wire that powers the antenna goes to nothing.

And then the actual antenna wire just plugs into the head unit as normal.

If that is the case i dont see how the antenna will power up at all???

What i have done for the mean time is just wired it to the switch next to the a/c unit.

I might leave it like this so i can control the antenna even when i have the radio on.

Link to comment
https://www.sau.com.au/forums/topic/125372-antenna/#findComment-2322779
Share on other sites
RANDY Veteran

RANDY

Posted
Posted

Ah ok.. and yeah, the wire that you referred to is not actually an antenna power wire, it's the remote wire for an amp.

The antenna itself is powered via wiring in the boot.

Very odd that this would happen. 100% sure that you haven't got the remote and the antenna wire switched around?

Link to comment
https://www.sau.com.au/forums/topic/125372-antenna/#findComment-2323986
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • JC71
      98 R34GTT 4k engine stumble

      By JC71 · Posted

      neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Dose Pipe Sutututu
      Why am I hitting a power wall with my stroked RB25?

      By Dose Pipe Sutututu · Posted

      Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
    • MBS206
      RB25DET with solid lifters - which cams ?

      By MBS206 · Posted

      Shimmed or shimless, still solid, no hydraulic pump up stuff.
    • MBS206
      NC MX5

      By MBS206 · Posted

      They have said food will be limited. Mainly meat pies and sausage rolls from memory. But they have a coffee van!
×
×
  • Create New...