Jump to content
SAU Community

Recommended Posts

Hey guys and girls :D

Just wondering if anyone has pics of their, or anyone elses R34 Gtt's engine bay with FMIC cooler pipes installed. I'm getting mine done next week and i'm just wondering about the stock air box and air intake pipe. I am guesing they are no longer usable due to the pipes being too big and thus the air intake pipe being unsuable, which in turn stops the airbox getting an air feed. So i am thinking i will have to go for a pod with a head sheild or something, but thought perhaps someone had found a way to use the stock air box.

I'm after pics of either of these set ups, FMIC pipes and still using the airbox (and perhaps the air feed), or with a pod filter set up (with a heat sheild/box, or however you have done it).

Sean

Link to comment
https://www.sau.com.au/forums/topic/125379-engine-bay-pic-of-r34s-with-fmic/
Share on other sites

i think satanic has a pic of a 34 with the fmic pipe going around the neo cover and the stock air feed. what you'll need to do is modify the air feed that goes to your airbox to go around the piping (by chopping about 2 inches from it). depending on the kit the neo cover needs to be sliced a little too.. but it's not too noticable.

someone on sau has posted a stagea with the piping all nice a neat in the engine bay.. it should be the same for the 34.

:P Just trying to help you out buddy.

But I'd think long and hard about it, as you'll save yourself a whole deal of trouble, unless you're aiming for say 300+RWKW i can't see the point. All you'll probably do is introduce reduced throttle response. Plus you can get your extra pipes when you rip out the air-box.

However, I realise not all mods are done for purely logically reasons, if you've got your heart set on shiney new pipes thats ok too. :D But just so long as you're aware of the situation.

yeah ive got pics of a r34 install. used a blitz intercooler. just look in my gallery. imho, thats the best bet cause cross over pipe = headache fabrication to the structure of the car/pipes itself. let me know if you need any help etc etc

search forums, there is a thread on the use/benefits (if any) of pvc as intercooler piping that goes on for pages and pages.

that nots not what your asking, if your doing custom fabrication then what the issue? hence 'custom'

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...