Jump to content
SAU Community

Recommended Posts

I would have a look around for an E36 325/328 if I were you. They really aren't that expensive, even E36 M3's are coming down to around the $30k mark, which means that the 325 will be getting around the $20k mark. I remember seeing a 325i Motorsport not long ago which was modified (paint, wheels etc) for $22k.

Valid point Ben !! Me thinks a bit more homework is required..........

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

zomg scott! Remember me ? rofl mm steak :D

Come to back da skylines you must. rofl :D

Good luck finding a BMW, and yes 20" chr0mes FTW :ermm:

As for your 32, a friend is looking to buy one at the end of the year ish. so yea.. :

Kinda hard to forget !! It was like watching a mouse devour a horse :D

Cheers for the heads up on your mate. That should work out well since I need a bit more time now to do some more research and finish a few things off on the Line.

Gave this a thought too but the LS400's are getting pretty old now. Getting too close to needing major work. On the Toyota subject though, maybe a non-turbo Supra is worth consideration............. :nyaanyaa:

ls400's are still made to this day... (well they are ls430's now) a late 90's model will set you back 20ish, u just need to look around cos there are some really nice ones getting around. as for engine work what are you talking about?????? they have a 1uzfe! a farking legendary engine, the strongest production engine in the world, goes 600,000+ km before needing a rebuild, the bottom end is good for over 1000hp and the top end is good for like 800hp. at the end of the day you dont really need to worry at all about the engine because it isnt going to break on you. as for build quality... i will anger you nissan enthusiests but toyotas build quality is much better, which is true....

ls400 is the way to go!

Well.. goto say I was looking at the 320ci bmw today.. but the newer models.. 2002-2003 - still a bit too expensive..

Nice car how I think they are a bit too pricey..

Have you checked out an audi A4 quattro with 1.8ltr Turbo - around $30k..

Lexus.. wouldn't be after one.. It's hard finding something to drive after having had a skyline.. its a move from power -> luxury

  • 2 weeks later...

OK, I've narrowed it down to the following ( reluctantly ). :

In this order...

1. 02 Scubydoo Impressa RX 2.5L sedan

2. 99 Luxo IS200

3. still considering 98 318is

So, what would YOU buy and why ???

I'm feeling pretty lost at this point. I've owned a Nissan Skyline ( MR30, HR31 & HCR32 ) for like 12 years now so it's a big leap for me.

you can easily afford a Stagea.

.............look into one maybe???????

I SOOO looked into this option but I want to get away from turbo charged cars and I know I would not be able to resist modding it. :

The Impreza is painfully slow and it won't be as well put together as the IS.

It's 0-100 is close to 10 seconds and that's slower than the IS200 for sure.

The IS would also be much nicer inside and it also looks nicer than the bugeye 02 Impreza.

Unless you have a huge wanting to go AWD I wouldn't choose the Impreza.

The Impreza is painfully slow and it won't be as well put together as the IS.

It's 0-100 is close to 10 seconds and that's slower than the IS200 for sure.

The IS would also be much nicer inside and it also looks nicer than the bugeye 02 Impreza.

Unless you have a huge wanting to go AWD I wouldn't choose the Impreza.

Really ??? I haven't had a chance to test drive one yet but I thought being a boxer style 2.5L and not a real big car it would step pretty lively. Kinda what I wanted to hear though. I'm sorta not an all wheel drive kinda person.

I know this won't be too well received but I've decided that after 11 years of driving Import Skylines it's time to move on.

The car I'm looking at getting is a 98 BMW 318is ( up to 2000 model ). Is there anyone on here who knows anything specific about this model that is good / bad etc. ?? Any meaningfull advice would be great.

Please hold off on the sledging and Skyline vs. BMW etc. Remember, I've been driving an Import Line for 11 years so I know how good they are. :) And it's going to break my heart to hand over my keys to someone else :(

I have one of these at the moment. 99 model

f**kin slow man. REALLY slow... u cant over take anything. Nice to drive as in comfort and ride... but the engine is a joke.

I cant wait to get back to a gtr again

BMW1.JPG

Dan, are you comparing it to your GT-R or something more mainstream like a 3.5L Magna etc ??

Like I said, for something close to 20K, midsize, that's a 99 model or younger, and is rear wheel drive, I'm not expecting to find much with power. So yeah..... :

So far I've heard nothing really bad about the IS200 ( on this forum and in general ) so that's looking favourable :(

sorry

comparing to a magna... the magna would have more power. not being able to over take is a real pain.

As far as the car goes. the brakes feel as good as the gtr. in having the car for over 2 years i havent had to change the pads once.

servicing isnt to bad... bmw give u a nice new model to drive while they have yours.

and if you can... get an auto. the manual is a bitch

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...