Jump to content
SAU Community

Recommended Posts

Some GTS-t's came with those ---- You could try asking an importer or parts importer like www.justjap.com or similar for them.

I also know a few japanese manufacturers make totally clear ones (without the orange bit) ive got them in a catalogue here from TAS, but i've got no idea where you'd get them.

im selling them as they were in the boot of my car when i got it along with heaps of other crap which i wont be using, they have been used as they arent in brand new condition but there are no cracks or nothing so they are in good nick.

i lied about the globe being orange, i just had another look at them and its the surround of the globe thats orange, it does look possible that you could remove the cover and then remove that small inner orange part that surrounds the globe, then just either use an orange globe or if you wish a clear one and it will look the same as those in the photo's you supplied.

Shaun

aybee... believe it or not, the clear ones are the cheapest ones you can buy :D

then comes the clear ones with the lil yellow bump...

and the most expensive are the GTR ones (full yellow)

Interestingly the full yellow ones are around $90 for the left and $70 for the right from nissan in japan... don't ask me why... think its coz most ppl take out the left one for air circulation up there hehe.

I was askin around bout gettin clear lights... and one of the guys from japan told me that ppl who had clear indicators were considered lame and that everyone tried to get the gtr lookin ones.

that is very odd about the prices!

well im waiting arrival of my 32 which has gtr rims, wing and very yellow indicators (which i assumed were standard but maybe not). i didnt think about them till i saw a couple of clear ones and remembered that id always been a fan, on any car. i dont care about losing the gtr look cause, firstly, its not and secondly im changing the rims and eventually removing the wing anyway. although i have to admit, i want a gtr front bar - more bump/gutter friendly than the current bomex bar :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Is it alright to top up with just another green coolant?
×
×
  • Create New...