Jump to content
SAU Community

Recommended Posts

Does anyone know where the oil pressure sender is on the RB engine? specifically rb20det...

I know they play up on most skylines, and many other nissans such as 300zx

...I want to try to replace it to see if i can get my gauge working right ;)

Also, is an oil pressure sender a universal unit? or car specific?

You can always get a thread adaptor to make another one fit i think, but will it be sending the right values to hte gauge?

Or is there a replacement that works fine eg rb30e from R31 or VL? Or from another nissan eg maxima etc.?

Thanks for your help,

Warren

Link to comment
https://www.sau.com.au/forums/topic/126565-oil-pressure-sender-on-rb-engine/
Share on other sites

if i can get a replacement from VDO and get it to work, i might buy a few and sell them for the hundreds of ppl on here that would love their stock gauge to work :P

Hahaha good plan

But now we know who your supplier is

i mean sell them for the same price as i bought them to the hundreds of people on SAU that want to get theirs to work

i didn't men sell them for hundreds (as in dollars)

but if they are about $60 each, i might not be able to afford to make the outlay for many (am a student still!)

i mean sell them for the same price as i bought them to the hundreds of people on SAU that want to get theirs to work

i didn't men sell them for hundreds (as in dollars)

but if they are about $60 each, i might not be able to afford to make the outlay for many (am a student still!)

Oh, i see ;)

Just after I bought my R32 the oil guage dropped to zero.

I was so happy to find out it didn't need a rebuild I didn't mind forking out $250 for a genuine sender.

But they are known for being unreliable, and will just break again

or do you have a part number?

maybe its the same part number as the 300zx item in the above link.. then we can just get that VDO item!

$60 is a little bit cheaper than $250...

Yeah, if it works, and is THAT much cheaper, why not? Hell, a lot of people use 300zx afm's so why not use another part :P

OK bad news team.. VDO don't have a listing for the rb20det

BUT... not to despair just yet.. i think that's because they don't know what our original part is, rather than they don't have a replacement for our original part

i'm sure, as with everythign else, that these parts were used on many nissan models.

if i can get a part number, maybe i can find another car (eg 300zx or R31 skyline) that has the same unit and they might actually have a listing for that car.....

sav_man

do you have a part number for the nissan part?

or anyone else?

cheers,

Warren

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It's almost certainly a reluctor generating an "AC" waveform. No, ECUs don't generally read those - they're usually set up for PWM square wave 0-5v stuff.
    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
×
×
  • Create New...