Jump to content
SAU Community

Recommended Posts

Hi everyone i am selling my GTR as i got a raise and can now afford to get a lease. :ban: ...but also means i will have to sell my monster... :cheers:

The car has had serious money spent by myself and the previous owner. The majority of the work undertaken on the car in Japan was at the Tomei workshop and at Mercury Motorsport here in Queensland. Car has huge potential to push out more power.

The car has the following modifications;

Induction -

HKS T04S Single Turbo Conversion;

HKS stainless Steel Manifold;

HKS 48mm External Waste Gate;

HKS Air Filter;

HKS 3.5inch dump;

Custom 4 inch Titanium Intake;

Samco pipes;

100mm FMIC;

Chrome Turbo Heat shield;

Braded turbo lines (oil etc);

Engine -

Work carried out by Tomei Japan;

Tomei 262 step I cams;

Tomei Oil Pump;

Head Restrictors;

Baffled Sump;

Samco Radiator kit;

High Pressure Radiator cap;

Motal 8100 sythetic oil;

Full length carbon radiator guide

(soon to have bayside blue cam covers)

Exhaust -

External venting dump off wastegate;

Apexi Exhaust control Valve (in cabin adjustment);

HKS 3.5inch dump;

Titanium 3.5inch Cat back Exhaust;

Interior -

Momo Steering Wheel;

Pivot large shirft light;

Razo gearknob;

Greddy Electronic Oil temp gauge;

Greddy Electronic Water temp gauge;

Greddy Electronic Oil Pressure gauge;

Greddy Boost gauge;

6 point Roll Cage, bolt in;

Sound deadaning removed;

Exterior -

Shaved rear wing;

Weight reduction;

Trust front bar;

Carbon Fibre Front Bonnet

N1 Headlights

Blue/white Bulbs

Wheels/Brakes

Panasport G7 17inch mag wheels;

Race pads;

Braded lines;

Tomei master cylinder stopper;

Tomei AWD box;

Suspension -

Tein HA Pro Fully Adjustable coilovers (near new);

Replaced mounts & bushes;

Cusco 30mm Front Swayabar;

Cusco 30mm Rear Swayabar;

Cusco Front upper arms;

Cusco Front Adjustable castor rods;

Racing diffs front and rear

Other -

Flashpoint Dual Immobilizer alarm;

Power - Making 292.5 all wheel KW on 1bar of boost and 307 all wheel KW on 1.2 bar (17psi) of boost. car has been very well setup to be quick.

I am in Brisbane and after offers over $27,000 neg.

please contact me via PM, email at fsmout @ thincprojects.com or on 0404 077 220.

also check out; http://www.carsales.com.au/pls/carsales/&a...sh_id=582734956

Cheers,

Francisco

post-8436-1153268367.jpg

post-8436-1153268435.jpg

post-8436-1153268621.jpg

post-8436-1153268635.jpg

post-8436-1153713405.gif

Edited by fsmout
Link to comment
https://www.sau.com.au/forums/topic/126723-r32-gtr-for-sale/
Share on other sites

  • 2 weeks later...

Sorry about the late reply...

Not sure about the fuel pump but its bigger than standard. its very loud but its in tank and i havent taken it out to check. Has got standard injectors...which i would say are highflowed for the power levels the car is producing.

The ECU is a Reytec (tomei computer) running a map flow sensor. Check out;

http://www.tomei-p.co.jp/_2003web-catalogu...dex-reytec.html

It has had the AC removed, however the climate control unit has been relocated to the center consol and is controlable etc.

Skyrine-dave, PM replied,

Cheers,

Francisco

Michael Whelans car was a silver R32 GTR, not this one.

This one is still a weapon, i've been for a ride in it and it's extremely impressive.

Good luck with the sale, for that price i'm sure you'll find someone to buy it, it's a lot of car for that kinda $$ !

Cheers,

Tommo.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...